Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.

Learn more

2711-T9A3

Need a Specific Revision?

The Allen-Bradley 2711-T9A3 terminal is a touchscreen operator terminal from the Allen-Bradley/Rockwell Automation Panelview 900 series. There are no physical keys on this terminal. The touchscreen on the 2711-T9A3 operator terminal is a 9-inch touchscreen with monochrome graphics. It can be used with a stylus as long as the stylus is not sharp enough to scratch or puncture the screen. The 2711-T9A3 operator terminal uses AC voltage.

Available

Available

$5053

Ships Fri, May 30

1 in stock

Ships Fri, May 30.

In Stock

Ships from Raleigh, NC

2 Year DO Supply Warranty

Learn more

Warranty

We sell industrial automation parts backed by our 2-year DO Supply Warranty.
Shipping

Same-day domestic and expedited international shipping with UPS, FedEx, DHL, and more.
Payment Methods

AMEX, Visa, MasterCard, Discover, wire transfer, and more, plus flexible payment plans.
Repairs & Exchanges

Repair and exchange services for all existing automation products.
Reseller Options

Drop shipping, blind shipping, and account shipping with no extra fees.

Technical specifications for 2711-T9A3

Manufacturer	Rockwell Automation
Brand	Allen-Bradley
Part Number/Catalog No.	2711-T9A3
Product Line	Panelview 900
Display Size	9 in.
Display Color	Monochrome
Input Type	Touchscreen
Communication	DH-485 and RS-232 Printer
Input Power	120 VAC
Memory	1008K bytes
Backlight	Non-replaceable
Communication Cable	1747-UIC
Shipping Weight	8 lbs.
Shipping Dimensions	16 x 14 x 8 in
Series	A, B, C, D, E, F
Product Lifecycle Status*	Discontinued/Obsolete

* The Allen Bradley 2711-T9A3 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T9A3 units instead of migration.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

View as PDF

Request a Repair

The Allen-Bradley 2711-T9A3 terminal is part of the discontinued PanelView 900 series of Human-Machine Interfaces (HMIs.) These terminals allow the operator to interact with the machines attached to the 2711-T9A3. A 9-inch (23-centimeter) monochrome screen on the terminal displays information. An RS-232 printer port and a 1747-UIC cable are the conduits through which the data is relayed. The 2711-T9A3 has a touchscreen and a keypad, and the internal backlight is replaceable. A 120-volt AC unit powers the system. No data greater than 1 MB can be stored in the internal memory. More data than this requires an external memory card. The weight of the 2711-T9A3 is 8 pounds (3.6 kilograms), and the length, the width and the thickness of the HMI are 16 inches (0.4 meters), 14 inches (0.35 meters) and 8 inches (0.2 meters), respectively. The DH-485 protocol enables a two-way conveyance of data on this terminal. A MicroLogix unit or an SLC 500 unit controls the network. Ladder logic is unnecessary if a direct data table is available.

Revision Part #	Also known as
2711-T9A3 Ser A	2711-T9A3/A, Series A, Rev A	Request a quote
2711-T9A3 Ser B	2711-T9A3/B, Series B, Rev B	Request a quote
2711-T9A3 Ser C	2711-T9A3/C, Series C, Rev C	Request a quote
2711-T9A3 Ser D	2711-T9A3/D, Series D, Rev D	Request a quote
2711-T9A3 Ser E	2711-T9A3/E, Series E, Rev E	Request a quote
2711-T9A3 Ser F	2711-T9A3/F, Series F, Rev F	Request a quote
2711-T9A3X	2711-T9A3/X, Series X, Rev X	Request a quote
Don't see your particular revision? Contact us now.

Size	9 inch
Input Type	Touch
Panel Cutout Height	224 mm (8.8 in)
Panel Cutout Width	305 mm (12 in)
Terminal Height	249 mm (9.80 in)
Terminal Width	336 mm (13.24 in)
Terminal Overall Depth	112 mm (4.4 in)
Terminal Mounted Depth	90 mm (3.54 in)