Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview 900 2711-T9A8L1

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711-T9A8L1

|

The 2711-T9A8L1 terminal is a DC-powered operator interface terminal from the Allen-Bradley/Rockwell Automation Panelview 900 series. It is operated with a 9-inch touchscreen that only supports monochrome graphics. The 2711-T9A8L1 operator interface terminal's touchscreen should not be operated with sharp tools which could puncture or scratch it. Instead, the operators should only use the touchscreen with their fingers or with an approved type of stylus. The 2711-T9A8L1 operator interface terminal has a nominal voltage rating of 24 Volts DC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711-T9A8L1

ManufacturerAllen Bradley
CategoryPanelviews
Product LinePanelview 900
Part Number2711-T9A8L1
Weight8.00 lbs (3.63 kg)
Display Size9 in.
Display ColorMonochrome
Input TypeTouchscreen
CommunicationDH+ and RS-232 Printer
Input Power24 VDC
Memory1008K bytes
BacklightNon-replaceable
Communication Cable2711-NC13
SeriesA, B, C, D, E, F
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711-T9A8L1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711-T9A8L1 units instead of migration.

The discontinued Allen Bradley Panelview 900 2711-T9A8L1 is an operator terminal that enables the user to interface with their machine. This HMI has a 9 in. Monochrome Display. The user is able to control the HMI using the Touchscreen to input information and data. This unit is powered using 24 VDC power. This unit has the following internal memory: 1008K bytes. If applicable this unit has an internal backlight replacement part number of Non-replaceable. The approximate shipping weight and dimensions are 8 lbs. and 16 x 14 x 8 in. The Data Highway Plus terminals are capable of point-to-point communication with a single controller, as well as network communication with multiple controllers over an Allen-Bradley DH+ network. Direct access to controller data files minimizes ladder logic. The PC memory card interface can also be used

Revision Part #Also known as
2711-T9A8L1 Ser A2711-T9A8L1/A, Series A, Rev A
2711-T9A8L1 Ser B2711-T9A8L1/B, Series B, Rev B
2711-T9A8L1 Ser C2711-T9A8L1/C, Series C, Rev C
2711-T9A8L1 Ser D2711-T9A8L1/D, Series D, Rev D
2711-T9A8L1 Ser E2711-T9A8L1/E, Series E, Rev E
2711-T9A8L1 Ser F2711-T9A8L1/F, Series F, Rev F
2711-T9A8L1X2711-T9A8L1/X, Series X, Rev X
Don't see your particular revision? Contact us now.