The 2711P-K15C4A6 is a PanelView Plus CE 1500 terminal from Rockwell Automation/ Allen Bradley. The terminal has a color display screen of 15 inches and it has a keypad for inputting commands when programming the 2711P-K15C4A6 PanelView Plus CE terminal. To connect to communication devices, the terminal accepts communications either through the RS-232, universal serial bus (USB) or through an ethernet connection. Additionally, the terminal comes loaded with a CE logic module that houses a 128MB compact flash card. The 2711P-K15C4A6 has a Random-Access Memory (RAM) capacity of 128MB. The terminal is powered through voltage range of 85 – 264 volts Alternating Current. The 2711P-RN20 can be used for an additional port, and the 2711P-K15C4A6 performs optimally when operated in an industrial environment that has a degree two pollution, an altitude not exceeding 2000 meters (non-derating), and used in an overvoltage category II applications. Also, the 2711P-K15C4A6 terminal is an open type module and should be installed in a certified enclosure.

The 2711P-K15C4A6, as with all other PanelView terminals, is recommended to be operated in Class 1, Division 2 Groups A, B, C, D for both non-hazardous and hazardous environments.  The terminal can accommodate a 30G operating shock and a 50G non-operating shock. Also, the 2711P-K15C4A6 accommodates a non-condensing relative humidity of between 5 and 95 percent when operating and a 5G vibration tested at a frequency range of between 10 and 500 Hertz. The 2711P-K15C4A6 features a 650 MHz Celeron processor. When mounting the 2711P-K15C4A6, leave a 2-inch space for both the bottom and top side of the terminal and the enclosure and a 1 inch for both the back and the side and back of the terminal.