The 2711P-B6C5D PanelView Plus 600 provides a graphical operator interface through a color display, pixel graphics, and HIM capability. It allows users to interface with electronic appliances, making it easy to monitor, control, and display information graphically through the HIM keypad/color touchscreen. The 2711P-B6C5D comes with F1-F10 function keys and a 5.5-inch color active Matrix (TFT) display unit. It measures 111 x 84 mm (4.37 x 3.3 inch.) in display dimensions and it measures 320 x 240 in its display resolutions. It has 18-bit color graphics. The input voltage of the 2711P-B6C5D is between 18 and 30V DC (24V nominal DC) and it has a maximum power consumption of 25 Watts (1A at 24V DC).

The 2711P-B6C5D weighs 930 g (2.05 lb). It has a shock rating of up to 15g at 11ms and operational vibration of 2g (57-500 Hz). The 2711P-B6C5D communicates with other devices through The RS-232 (DH-485) ports. The 2711P-B6C5D has dimensions of 167 x 266 x 98 mm (6.58 x 10.47 x 3.86 in). The operating temperature of the 2711P-B6C5D is between 0 and 55 deg. C (32 and 131 deg. F) and the storage temperature is between -25 and 70 deg. C (-13 and 158 deg. F), both at a working relative humidity between 5 and 95% without condensing at 0-55 degrees C (32-131 degrees F). It has up to 15g shock rating at 11ms and an operational vibration of up to 2g (57-500 Hz).

The 2711P-B6C5D PanelView terminal is the successor product of the PanelView Standard Operator Terminal. This HMI comes with certifications from c-UL-us, CE (EMC), CE (LVD), C-Tick and Marine and designed and approved for use in Class I, Div 2, Group A, B, C, D, Class I, Zone 2, Group IIC (2), Class II, Div 2 Groups F, G and Class III Hazardous Locations. This operator terminal is flush mounted to a NEMA / UL / IP rated panel specifically NEMA Type 12, 13, 4X (Indoor use only), IP54, IP65 enclosures which may be installed with fans, heating or cooling systems depending on the ambient temperature. Create a panel cutout with dimensions of 142 (5.61) for top and 241 (9.50) for width. Recommended clearance measures 51 mm (2 in.) for Top, 102 mm (4 in.) for bottom, 25 mm (1 in.). This mounting clearances ensures adequate air flow for maintaining the internal temperature of the circuitry.

It has 5.5-inch process visualization screen with a display area of 112 x 84 mm (4.4 x 3.3 in.) and resolution of 320 x 240 pixels. It has a dual input interface via the Keypad and Touchscreen interfaces.

This HMI terminal is AC powered with rated supply range is 18 to 32VDC with nominal supply of 24VDC.