2711P-K6M20D

The Allen-Bradley 2711P-K6M20D is a PanelView Plus 600 terminal. It has a stainless-steel domed membrane keypad input, as well as a grayscale display. This terminal’s keypad consists of numeric keys, navigation keys, and 10 user-configurable function keys that users can assign their own labels to. The keypad responds to gloved and ungloved fingers. It also features a 5.5-inch screen that is a monochrome passive matrix, film compensated super-twist nematic type and has an image contrast ratio of 0.16875. The display resolution of this screen is 320 x 240, it has 32-level grayscale graphics, and its display area is 4.37 x 3.30 inches. While the screen is backlit with LEDs, note that the backlight is not replaceable. The 2711P-K6M20D also comes with a time clock that is battery-backed and used for timestamps of critical data. The clock has an accuracy of +/-2 minutes each month. The 2711P-K6M20D has a 24 Volts DC nominal input voltage and an input voltage range of 18 to 30 Volts DC. It also has a maximum DC power consumption of 25 W or 1 Amps at 24 Volts DC and a non-condensing relative humidity of 5 to 95%. Its operating temperature is 0 to 55 degrees Celsius, while its non-operating temperature is -25 to 70 degrees Celsius. The 2711P-K6M20D also has an operating shock of 15 g at 11 milliseconds and a non-operating shock of 30 g at 11 milliseconds. The terminal has an approximate weight of 2.05 pounds and measures 6.58 x 10.47 x 3.86 inches. It comes with a 64-MB RAM and 64-MB non-volatile flash memory, with 20 MB dedicated to application storage.

he 2711P-K6M20D carries certification from internationally recognized bodies including c-UL-us, CE (EMC), CE (LVD), C-Tick and Marine. This HMI is approved for use in Class I, Div 2, Group A, B, C, D, Class I, Zone 2, Group IIC (2), Class II, Div 2 Groups F, G and Class III Hazardous Locations. Install this HMI flush mounted to an enclosure that offers adequate protection against ingress of water, entry of dust and particles and other contaminants that may shorten the life of this electronic device. Specifically, NEMA Type 12, 13, 4X (Indoor use only), IP54, IP65 enclosures. Climate control devices may also be installed such as a fan or heater may be installed accordingly to maintain the required operating temperature which is 0…55 °C (32…131 °F).

This 2711P-K6M20D requires an external supply voltage of 18-32VDC. It comes with an Ethernet interface port for communicating with Ethernet enabled devices and an RS232 port that supports DF1 and DH485 communication protocol.