2711P-B7C4D2 - In Stock | Allen Bradley Panelview Plus 700

×

2711P-B7C4D2

Rated 4.3 with 22 reviews
About | Product Specifications | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-B7C4D2

Description: The Allen-Bradley/Rockwell Automation 2711P-B7C4D2 terminal is a DC-powered interface terminal from the Allen-Bradley Panelview Plus 700 terminal series. It operates with an input voltage range between 18 and 32 Volts DC. The 2711P-B7C4D2 interface terminal can be controlled through either a keypad or a touchscreen. The keypad features arrow keys, command keys, numeric keys, and programmable function keys, and the touchscreen features color graphics. The 2711P-B7C4D2 interface terminal comes with 2 USB ports, an RS-232 port, and an Ethernet port.
In Stock Ships Today
Request a quote for 2711P-B7C4D2

Description: The Allen-Bradley/Rockwell Automation 2711P-B7C4D2 terminal is a DC-powered interface terminal from the Allen-Bradley Panelview Plus 700 terminal series. It operates with an input voltage range between 18 and 32 Volts DC. The 2711P-B7C4D2 interface terminal can be controlled through either a keypad or a touchscreen. The keypad features arrow keys, command keys, numeric keys, and programmable function keys, and the touchscreen features color graphics. The 2711P-B7C4D2 interface terminal comes with 2 USB ports, an RS-232 port, and an Ethernet port.
About | Products Specs | FAQ

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-B7C4D2.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 22 reviews

    Technical Specifications for 2711P-B7C4D2

ManufacturerRockwell Automation
Part Number/Catalog No.2711P-B7C4D2
Display Size6.5 inches
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Resolution:640 x 480
Display Area:132 x 99 mm (5.2 x 3.9 in.)
Display Type:Color active-matrix TFT
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F)
Input lifespan:1 million actuations
Operator Input:Touch / Keypad
Product Type:Operator Terminals
BrandAllen-Bradley
Product LinePanelview Plus 700
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationEthernet and RS-232
Input Power18-32 VDC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight8 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B7C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B7C4D2 units instead of migration.

ManufacturerRockwell Automation
Part Number/Catalog No.2711P-B7C4D2
Display Size6.5 inches
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Resolution:640 x 480
Display Area:132 x 99 mm (5.2 x 3.9 in.)
Display Type:Color active-matrix TFT
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F)
Input lifespan:1 million actuations
Operator Input:Touch / Keypad
Product Type:Operator Terminals
BrandAllen-Bradley
Product LinePanelview Plus 700
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationEthernet and RS-232
Input Power18-32 VDC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight8 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B7C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B7C4D2 units instead of migration.

s

About 2711P-B7C4D2

The discontinued Allen Bradley Panelview Plus 700 2711P-B7C4D2 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. The user is able to control the HMI using the Keypad/Touchscreen to input information and data. This unit is powered using 18-32 VDC power. This unit is installed with a logic module that has a 128 MB memory. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 in. It supports EtherNet/IP (Ethernet Industrial Protocol) which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

The Allen-Bradley 2711P-B7C4D2 is a PanelView Plus 700 operator terminal. This terminal mainly features a dual input interface, colored display screen, and an embedded logic module with a variety of communication interfaces. Specifically, it has a 6.5-inch display screen, embedded touch and keypad interfaces, and supports Ethernet I/P, DF1, and DH-485 communication protocols.

The display area of this operator terminal is 132 x 99 millimeters (5.2 x 3.9 inches) while the resolution is 640 x 480 pixels. The screen is made of a Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD) paired with a backlight that has a luminance of 300 cd/m2 Nits. The backlight has an operating lifespan of 50,000 hours.

The touch input available to this device is an analog resistive touchscreen with an operating life of up to 1 million actuations. Similarly, the keypad interface has the same operating lifespan. The lifespan can be maximized if the input interfaces are operated at 10-110 g actuation force and 340 g actuation force for Touch and keypad inputs, respectively.

The communication protocols available to this device both support multiple node communication and point-point communication. For multi-node communication, the Ethernet communication port may be used while for point-to-point communication, the RS-232 port may be utilized. Depending on the communication protocols used, the communication cable requirement differs.

The 2711P-B7C4D2 also has two (2) USB interfaces, ideal for attachment of mouse and keyboard inputs. This provides additional input options aside from the embedded input interface.

FAQ for 2711P-B7C4D2

Can I install USB mouse and keyboard for external input peripherals to this terminal?


Yes. USB mouse and keyboard may be inserted to the USB ports available to the 2711P-B7C4D2.

Does the 2711P-B7C4D2 come with a logic module?


Yes. It has a 128MB logic module installed.

What are the available communication ports to the 2711P-B7C4D2?


The 2711P-B7C4D2 has Ethernet and RS232 communication interfaces.

Technical Description of 2711P-B7C4D2

The 2711P-B7C4D2 is a PanelView Plus 700 Operator Terminal from Allen-Bradley. This operator terminal is powered by an external 18-30 Volts DC supply voltage and has a 6.5-inch colored display with embedded Ethernet, RS-232, and two (2) USB communication ports. This operator terminal has an embedded keypad and touchscreen input interface and 128 MB Logic module.

Repair Services for 2711P-B7C4D2

Type Lead Time Price Action
Repair Service 2-4 weeks $1224cartAdd to Cart

We Can Repair Your Panelview Plus 700

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50

Revisions for 2711P-B7C4D2

Please refer to the manual for more information about the 2711P-B7C4D2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-B7C4D2 Ser A
2711P-B7C4D2/A, Series A, Rev A Request Quote
2711P-B7C4D2X
2711P-B7C4D2/X, Series X, Rev X Request Quote
Common misspellings:
  • 27l1P-B7C4D2
  • 271lP-B7C4D2
  • 2711P-87C4D2
  • 2711P-B7CAD2
  • 2711PB7C4D2

Reviews for 2711P-B7C4D2

Internal Review

"The PanelView Plus 700 operator terminal with catalog number 2711P-B7C4D2 is an operator terminal that is ideally used in small to medium applications. The dual input capability of this operator terminal, compared to Touch or keypad only devices, gives operators input flexibility. Additionally, the embedded Ethernet interface allow this terminal to be used in modern Ethernet communication network though the terminal itself is obsolete. " -DO Supply Tech

Dimensions For 2711P-B7C4D2

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-B7C4D2

Resolutions For 2711P-B7C4D2

Size 6.5 inch (700 color)
Input Type Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 6.5 in.
Viewing Area 132 x 99 mm (5.2 x 3.9 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
About

Technical Specifications for 2711P-B7C4D2

ManufacturerRockwell Automation
Part Number/Catalog No.2711P-B7C4D2
Display Size6.5 inches
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Resolution:640 x 480
Display Area:132 x 99 mm (5.2 x 3.9 in.)
Display Type:Color active-matrix TFT
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F)
Input lifespan:1 million actuations
Operator Input:Touch / Keypad
Product Type:Operator Terminals
BrandAllen-Bradley
Product LinePanelview Plus 700
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationEthernet and RS-232
Input Power18-32 VDC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight8 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
Part Number/Catalog No.2711P-B7C4D2
Display Size6.5 inches
Input Voltage range:85-264VAC, 47-63 Hz
Integrated ports:Ethernet, RS-232, 1 USB host
Resolution:640 x 480
Display Area:132 x 99 mm (5.2 x 3.9 in.)
Display Type:Color active-matrix TFT
BacklightCCFL, 50,000 hours min at 25 ° C (77 °F)
Input lifespan:1 million actuations
Operator Input:Touch / Keypad
Product Type:Operator Terminals
BrandAllen-Bradley
Product LinePanelview Plus 700
Display ColorColor
Input TypeKeypad/Touchscreen
CommunicationEthernet and RS-232
Input Power18-32 VDC
Memory128 MB
Communication Cable1761-NET-ENI
Shipping Weight8 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 2711P-B7C4D2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-B7C4D2 units instead of migration.

About 2711P-B7C4D2

The discontinued Allen Bradley Panelview Plus 700 2711P-B7C4D2 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. The user is able to control the HMI using the Keypad/Touchscreen to input information and data. This unit is powered using 18-32 VDC power. This unit is installed with a logic module that has a 128 MB memory. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 in. It supports EtherNet/IP (Ethernet Industrial Protocol) which is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

The Allen-Bradley 2711P-B7C4D2 is a PanelView Plus 700 operator terminal. This terminal mainly features a dual input interface, colored display screen, and an embedded logic module with a variety of communication interfaces. Specifically, it has a 6.5-inch display screen, embedded touch and keypad interfaces, and supports Ethernet I/P, DF1, and DH-485 communication protocols.

The display area of this operator terminal is 132 x 99 millimeters (5.2 x 3.9 inches) while the resolution is 640 x 480 pixels. The screen is made of a Color active matrix, thin-film transistor (TFT) with liquid crystal display (LCD) paired with a backlight that has a luminance of 300 cd/m2 Nits. The backlight has an operating lifespan of 50,000 hours.

The touch input available to this device is an analog resistive touchscreen with an operating life of up to 1 million actuations. Similarly, the keypad interface has the same operating lifespan. The lifespan can be maximized if the input interfaces are operated at 10-110 g actuation force and 340 g actuation force for Touch and keypad inputs, respectively.

The communication protocols available to this device both support multiple node communication and point-point communication. For multi-node communication, the Ethernet communication port may be used while for point-to-point communication, the RS-232 port may be utilized. Depending on the communication protocols used, the communication cable requirement differs.

The 2711P-B7C4D2 also has two (2) USB interfaces, ideal for attachment of mouse and keyboard inputs. This provides additional input options aside from the embedded input interface.

FAQ for 2711P-B7C4D2

Can I install USB mouse and keyboard for external input peripherals to this terminal?


Yes. USB mouse and keyboard may be inserted to the USB ports available to the 2711P-B7C4D2.

Does the 2711P-B7C4D2 come with a logic module?


Yes. It has a 128MB logic module installed.

What are the available communication ports to the 2711P-B7C4D2?


The 2711P-B7C4D2 has Ethernet and RS232 communication interfaces.

Technical Description of 2711P-B7C4D2

The 2711P-B7C4D2 is a PanelView Plus 700 Operator Terminal from Allen-Bradley. This operator terminal is powered by an external 18-30 Volts DC supply voltage and has a 6.5-inch colored display with embedded Ethernet, RS-232, and two (2) USB communication ports. This operator terminal has an embedded keypad and touchscreen input interface and 128 MB Logic module.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1224cartAdd to Cart

We Can Repair Your Panelview Plus 700

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Type Lead Time Price Action
Repair Service 2-4 weeks $1224cartAdd to Cart

We Can Repair Your Panelview Plus 700

We have a team of highly trained technicians that can repair your Panelview Plus quickly at a great low price. To get a repair quote call 1-800-730-0292 or email sales@dosupply.com. Some of the benefits of our repair process includes:

  • Repair Turnaround of 3-5 Days for Most Panelview Plus
  • Rush Repairs of 1-3 Days
  • Fast Return of Your Repair via UPS, FedEx, or DHL.
  • If the item is not repairable, you can choose to have it returned to you free of charge or it can be counted as an exchange credit toward a refurbished or surplus unit if available.
  • Wide range of repairs that can be completed by our highly skilled technicians as shown below.
  • All Repairs Come with Our 1-Year Warranty!

Repair Capabilities

We Can Repair Your Hardware Failures Including:

  • Communication Failures
  • Broken Toushcreens/Keypads
  • Broken Glass
  • Displays (Dead/Dim/Lines/Missing Pixels)
  • Dead Backlights
  • Broken Housing/Bezel
  • Power Board Failures

Start UP Error Codes and Messages:

  • RAM Test- Error 1
  • Internal CF- Error 23
  • CRC Check- Error 24
  • Watchdog Test- Error 30
  • Stuck Key- Error 31
  • Stuck Touch- Error 31.5
  • Battery Test- Error 32
  • NVRAM Access- Error 33.5
  • EXE Check- Error 40
  • External CF- Error 50
Revisions

Please refer to the manual for more information about the 2711P-B7C4D2 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2711P-B7C4D2 Ser A
2711P-B7C4D2/A, Series A, Rev A Request Quote
2711P-B7C4D2X
2711P-B7C4D2/X, Series X, Rev X Request Quote

Common misspellings:
  • 27l1P-B7C4D2
  • 271lP-B7C4D2
  • 2711P-87C4D2
  • 2711P-B7CAD2
  • 2711PB7C4D2
PDF
2711P-B7C4D2 PDF
Resolutions

Resolutions For 2711P-B7C4D2

Size 6.5 inch (700 color)
Input Type Keypad/ Touch
Display Type Color active-matrix TFT
Display Size (Diagonal) 6.5 in.
Viewing Area 132 x 99 mm (5.2 x 3.9 in.)
Display Resolution 640 x 480, 18-bit color graphics
Typical Brightness 300 cd/m2 (Nits)
Reviews

Reviews for 2711P-B7C4D2

Internal Review

"The PanelView Plus 700 operator terminal with catalog number 2711P-B7C4D2 is an operator terminal that is ideally used in small to medium applications. The dual input capability of this operator terminal, compared to Touch or keypad only devices, gives operators input flexibility. Additionally, the embedded Ethernet interface allow this terminal to be used in modern Ethernet communication network though the terminal itself is obsolete. " -DO Supply Tech