2711P-RBT7 - In Stock | Allen Bradley Panelview Plus 700

2711P-RBT7

Rated 4.6 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2711P-RBT7

Description: The 2711P-RBT7 replacement bezel is a plastic bezel manufactured by Allen-Bradley/Rockwell Automation. It is compatible to use with the PanelView Plus 700 terminals. 
In Stock Ships Today
Request a quote for 2711P-RBT7

Description:

The 2711P-RBT7 replacement bezel is a plastic bezel manufactured by Allen-Bradley/Rockwell Automation. It is compatible to use with the PanelView Plus 700 terminals. 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2711P-RBT7.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 20 reviews

    Technical Specifications for 2711P-RBT7

BrandAllen-Bradley / Rockwell Automation
SeriesPanelview Plus 700
Part number2711P-RBT7
Product description Replacement bezel
TypeAccessory
MaterialPlastic
Ultraviolet protectionYes
Operator input Touchscreen
CompatibilityPanelView Plus 700 Terminals
StandardsC-TICK, CCC, KC
BrandAllen-Bradley / Rockwell Automation
SeriesPanelview Plus 700
Part number2711P-RBT7
Product description Replacement bezel
TypeAccessory
MaterialPlastic
Ultraviolet protectionYes
Operator input Touchscreen
CompatibilityPanelView Plus 700 Terminals
StandardsC-TICK, CCC, KC
s

About 2711P-RBT7

The 2711P-RBT7 replacement bezel is a PanelView Plus accessory that is made by Allen-Bradley/Rockwell Automation. This plastic bezel is a field-replaceable bezel for PanelView Plus terminals. The 2711P-RBT7 replacement bezel has a durable design with an IP 65 protection rating, which means that it is rated to be dustproof. It is advised to switch off the power to the terminal when removing the old bezel from the terminal and replacing it with the new bezel. The users can replace the bezel without removing other modules around the terminal such as the logic module and the communication module. The durable plastic material that this bezel is made of ensures that it will have a long field operating life and reduce the negative effects of ultraviolet light. The display of the terminal must be set on a flat stable surface before removing or replacing the bezel.



 



The 2711P-RBT7 replacement bezel is 7 inches wide and it is made of white plastic. It acts as a protective enclosure that provides IP 65, NEMA 4X, 12, and 13 rated levels of protection to a terminal. If the touchscreen of the terminal cannot be calibrated properly, the display module or bezel must be replaced. This bezel supports a variety of installation options, including wall mounting. The 2711P-RBT7 replacement bezel is compatible with the PanelView Plus 700 terminals. Touchscreen connectors and screws secure the bezel to the display. The bezel can be replaced by removing the screws, the small metal plates, and the sealing gasket. When mounting the touchscreen panel on the bezel, the front of the bezel extends from the front of the panel.  The terminal sealing gasket forms a compression type of seal. It is advised to use the industrial terminal which is installed in this bezel replacement in an indoor environment that is not hazardous.



Repair Services for 2711P-RBT7

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-RBT7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 2711P-RBT7

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2711P-RBT7

Resolutions For 2711P-RBT7

About

Technical Specifications for 2711P-RBT7

BrandAllen-Bradley / Rockwell Automation
SeriesPanelview Plus 700
Part number2711P-RBT7
Product description Replacement bezel
TypeAccessory
MaterialPlastic
Ultraviolet protectionYes
Operator input Touchscreen
CompatibilityPanelView Plus 700 Terminals
StandardsC-TICK, CCC, KC
BrandAllen-Bradley / Rockwell Automation
SeriesPanelview Plus 700
Part number2711P-RBT7
Product description Replacement bezel
TypeAccessory
MaterialPlastic
Ultraviolet protectionYes
Operator input Touchscreen
CompatibilityPanelView Plus 700 Terminals
StandardsC-TICK, CCC, KC

About 2711P-RBT7

The 2711P-RBT7 replacement bezel is a PanelView Plus accessory that is made by Allen-Bradley/Rockwell Automation. This plastic bezel is a field-replaceable bezel for PanelView Plus terminals. The 2711P-RBT7 replacement bezel has a durable design with an IP 65 protection rating, which means that it is rated to be dustproof. It is advised to switch off the power to the terminal when removing the old bezel from the terminal and replacing it with the new bezel. The users can replace the bezel without removing other modules around the terminal such as the logic module and the communication module. The durable plastic material that this bezel is made of ensures that it will have a long field operating life and reduce the negative effects of ultraviolet light. The display of the terminal must be set on a flat stable surface before removing or replacing the bezel.



 



The 2711P-RBT7 replacement bezel is 7 inches wide and it is made of white plastic. It acts as a protective enclosure that provides IP 65, NEMA 4X, 12, and 13 rated levels of protection to a terminal. If the touchscreen of the terminal cannot be calibrated properly, the display module or bezel must be replaced. This bezel supports a variety of installation options, including wall mounting. The 2711P-RBT7 replacement bezel is compatible with the PanelView Plus 700 terminals. Touchscreen connectors and screws secure the bezel to the display. The bezel can be replaced by removing the screws, the small metal plates, and the sealing gasket. When mounting the touchscreen panel on the bezel, the front of the bezel extends from the front of the panel.  The terminal sealing gasket forms a compression type of seal. It is advised to use the industrial terminal which is installed in this bezel replacement in an indoor environment that is not hazardous.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-RBT7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2711P-RBT7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF