Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Panelview Plus 700 2711P-T7C15A2

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711P-T7C15A2

|
Need a Specific Revision?

The 2711P-T7C15A2 terminal is an operator interface terminal from the Allen-Bradley/Rockwell Automation Panelview Plus 700 series. It can be controlled by a touchscreen that is 7 inches wide and that supports full color graphics. The users of the 2711P-T7C15A2 operator interface terminal can use the touchscreen either with their fingers or with a stylus that is not sharp enough to create scratches, dents, or punctures in the screen. It supports the ControlNet network for communication purposes.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711P-T7C15A2

ManufacturerAllen Bradley
CategoryPanelviews
Product LinePanelview Plus 700
Part Number2711P-T7C15A2
Weight32.00 lbs (14.51 kg)
Display Size6.5 in.
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Input Power85-264 VAC
Memory128 MB
Backlight2711P-RL7C
Communication Cable1747-KFC15A
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711P-T7C15A2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T7C15A2 units instead of migration.

View as PDF
Request a Repair

The Allen-Bradley 2711P-T7C15A2 PanelView™ Plus 6 real-time monitoring terminal has a display size of 6.5 inches. The display is a touchscreen that shows display information graphically. Operators can control it easily because the 2711P-T7C15A2 is user-friendly. Besides being a display module, it is also a logic module and a communication module. The 2711P-T7C15A2 has a replaceable battery. The battery life of this terminal is around four years minimum at 25 °C. Remove the power first when you want to remove or replace the battery. This terminal has a 128-MB flash memory and a 512-MB RAM (with 79 MB of free user memory). It also has an SD card slot. The Allen-Bradley 2711P-T7C15A2 comes with an integrated AC power supply. The power rating is 85-264V AC (47-63 Hz) and 160 VA maximum. A ground connection is required for electromagnetic compliance (EMC) with the EMC directives of the European Union (EU) for the CE mark of conformity. The wire gauge of the protective earth is 14-12 AWG. The wire gauge of the functional earth is 14-10 AWG. A protective earth ground connection should be used for safety and regulatory compliance. Improper electrical wiring may cause damage to the communications connectors. Wiring failure may result in electric shock.

The discontinued Allen Bradley Panelview Plus 700 2711P-T7C15A2 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. The user is able to control the HMI using the Touchscreen to input information and data. If applicable, this unit has an internal backlight replacement part number of 2711P-RL7C. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 inches, respectively. The ControlNet terminals can connect to a single or multiple controllers on a ControlNet network. They support scheduled and unscheduled access to controller data and redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating with a ControlLogix system. Every terminal features a Network Access port for local access to the ControlNet network.

Revision Part #Also known as
2711P-T7C15A2 Ser A2711P-T7C15A2/A, Series A, Rev A
2711P-T7C15A2X2711P-T7C15A2/X, Series X, Rev X
Don't see your particular revision? Contact us now.