Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Panelview Plus 700 2711P-T7C15D1

2711P-T7C15D1

|

The Allen-Bradley/Rockwell Automation 2711P-T7C15D1 terminal is a touchscreen-only type of interface terminal from the Allen-Bradley Panelview Plus 700 series. Its touchscreen is 7 inches wide with support for color graphics. The 2711P-T7C15D1 touchscreen interface terminal is DC-powered and it has an input voltage range of 18 to 32 Volts DC. It supports the ControlNet network and it has a ControlNet communication port.

Ships Today.
In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.

  • Repairs and exchanges are available for all automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 2711P-T7C15D1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2711P-T7C15D1
Product LinePanelview Plus 700
Display Size6.5 in.
Display ColorColor
Input TypeTouchscreen
CommunicationControlNet
Input Power18-32 VDC
Memory64 MB
Backlight2711P-RL7C2
Communication Cable1747-KFC15A
Shipping Weight8 lbs.
Shipping Dimensions14 x 11 x 8 in
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711P-T7C15D1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T7C15D1 units instead of migration.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2711P-T7C15D1 is one version of the PanelView™ Plus 6 – 700 Terminals. This terminal has a 6.5-inch touchscreen. The display type is color active matrix TFT and has 640 x 480 resolution with 18-bit color graphics. The width of the display is 5.2 x 3.9 inches. This display has a CCFL backlight that is replaceable. The luminance of this terminal is 300 cd/m2 (Nits). The weight of this terminal is approximately 1.7 kg. This terminal comes with a flash memory of 64 MB, a 512-MB RAM, and a 79-MB free user memory. The Allen-Bradley 2711P-T7C15D1 has dimensions of 179 x 246 x 55 mm. This terminal also has an SD card slot for external storage. This terminal has an Ethernet port for being connected to the internet. This terminal has an input voltage of 18-32V DC. The power consumption is 70 W maximum and 39 W typical. The Allen-Bradley 2711P-T7C15D1 has a removable battery. When you install and remove the battery, be sure to remove the power first. For a complete step of removing and installing the battery is readily available in the manual. Keep the battery in a cool and dry place. The recommended temperature for battery storage is 25 °C with a relative humidity is 40 – 60%.  Never store the battery at a temperature of 60 °C for more than three days to avoid the possibility of leakage.

The discontinued Allen Bradley Panelview Plus 700 2711P-T7C15D1 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5-inch color display. The user is able to control the HMI using the touchscreen to input information and data. If applicable, this unit has an internal backlight replacement part number of 2711P-RL7C2. The ControlNet terminals can connect to a single or multiple controllers on a ControlNet network. They support scheduled and unscheduled access to controller data They also support redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating to a ControlLogix system. Every terminal features a Network Access port for local access to the ControlNet network.

Revision Part #Also known as
2711P-T7C15D1 Ser A2711P-T7C15D1/A, Series A, Rev A
Request a quote
2711P-T7C15D1X2711P-T7C15D1/X, Series X, Rev X
Request a quote
Don't see your particular revision? Contact us now.