Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Panelview Plus 700 2711P-T7C4B1

Product image is representative; revision or series may vary. Contact us to request a specific version.

2711P-T7C4B1

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 2711P-T7C4B1 terminal is a Panelview Plus 700 series interface terminal that supports AC and DC voltage. It is equipped to operate with either 85 to 264 Volts AC or 18 to 30 Volts DC of rated input voltage, depending on the system that it is installed in. The 2711P-T7C4B1 interface terminal and the system that it is installed in can both be controlled by the terminal�s touchscreen. This touchscreen is 6.5 inches wide and it can display its data with full color graphics. The 2711P-T7C4B1 interface terminal�s touchscreen can detect touch commands from the users� fingertips or from plastic styluses.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2711P-T7C4B1

ManufacturerAllen Bradley
CategoryPanelviews
Product LinePanelview Plus 700
Part Number2711P-T7C4B1
Weight4.00 lbs (1.81 kg)
Display Size6.5 in.
Display ColorColor
Input TypeTouchscreen
CommunicationEthernet and RS-232
Input Power85-264 VAC and 18-32 VDC
Memory64 MB
Backlight2711P-RL7C
Communication Cable1761-NET-ENI
SeriesSeries A, B, C, D, E, F, G
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 2711P-T7C4B1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 2711P-T7C4B1 units instead of migration.

View as PDF
Request a Repair

The discontinued Allen Bradley Panelview Plus 700 2711P-T7C4B1 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. The user is able to control the HMI using the Touchscreen to input information and data. This unit is powered using 85-264 VAC and 18-32 VDC power. This unit has the following internal memory: 64 MB. If applicable this unit has an internal backlight replacement part number of 2711P-RL7C. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 in. EtherNet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.

Revision Part #Also known as
2711P-T7C4B1 Ser A2711P-T7C4B1/A, Series A, Rev A
2711P-T7C4B1X2711P-T7C4B1/X, Series X, Rev X
Don't see your particular revision? Contact us now.