HVX001A1-2A1B1

The EATON HVX001A1-2A1B1 is a Variable Frequency Drive that has a NEMA 1 enclosure with digital control readouts approved by UL, CSA, and CE standards. This unit has modern display LCD keypads with keypad lockouts and comes with multi-colored units. It has an internal dynamic Brake Chopper Circuit and is provided with the control methods Frequency Control (V/f) and Open-loop Sensorless Vector Control, and has a programmable Start/Stop control. It accepts input control signals from 0-10 Volts DC and 4-20 mA.

This Variable Frequency Drive comes with 240 Volts AC Input and output voltage and has an output maximum amp that runs up to 4.8 A. Additionally, this unit has a three-phase input, and no bypass, no line contractor, a starting torque up to 200 Percent, and a torque frequency at 1 Hertz 100 Percent. It has a high adjustable acceleration time of 0 to 3000 seconds and an adjustable deceleration time of 0 to 3000 seconds.

The HVX001A1-2A1B1 is programmed to prevent Over temperature, Motor Overload, Motor Stall, and Motor Under load, with a protection capability that can withstand Overcurrent, Overvoltage, Under voltage, Earth Fault, Input Phase Supervision, and Motor Phase Supervision. This unit has a frame height of 12.9 inches, a width of 5 inches, and a depth of 7.5 inches.