The Allen-Bradley HVX003A2-4A1B1 Drive is a product in the HVX9000 AF series. It has a 3-phase nominal input voltage of 480V and it can operate in ranges between 380V and 500V. The output voltage can be adjusted from 0 to the input voltage level. Its horsepower rating is about 3HP or 2.2kW. The input frequency varies between 45 and 66Hz with a 50-60Hz default rate. The output frequency is programmable within a range of 0-320Hz and a frequency resolution of 0.01 Hz. The enclosure for this drive is a NEMA 12 type. The HVX003A2-4A1B1 has an ambient operating temperature of -10-40 degrees Celsius. The storage temperature is between -40 and 70 degrees Celsius with a relative humidity of up to 95% noncondensing and non-corrosive. The operational vibration is up to 1G at 15.8-150 Hz and it has an altitude limit of up to 1000 meters (3,300 feet). Above that, the HVX003A2-4A1B1 will derate at 1% of the drive rated amps.

The HVX003A2-4A1B1 is necessary to use +75° C or higher heat-resistant copper cables. The maximum length of the cables should be about 984 ft. (300m). The motor cables should cross other cables at a 90-degree angle. This type of drive uses a specific UL cable that ensures the compatibility of the cable towards the drive. The HVX003A2-4A1B1 uses an FR4 cable for its frame size and 4.8-5.6 A for its NEC input current. The wire size for the power and ground cables is similar with a value of 14. The terminal size for the power terminal is 16-12 and the same is true for the ground terminal. The approximate dimensions for the HVX003A2-4A1B1 is 327 x 128 x 190 mm (12.9 x 5 x 7.5in.) and it has a mass of 5kg (11lb).