DG1-32012FB-C21C

The Eaton Cutler-Hammer DG1-32012FB-C21C drive is a variable frequency drive from the DG1 series. The rated operational voltage of the drive is 230 to 240 Volts AC. It is a 3-phase device and runs with 50 to 60 Hertz frequency. The drive can be wall mounted easily. It can run normal duty and heavy-duty applications with ratings of 5 and 0 Horsepower, respectively. It is built with an FR2 frame and is 6.61 inches in width, 16.5 inches in height, and 9.63 inches in depth. The DG1-32012FB-C21C drive comes with Modbus communication as a standard communication feature. It is an industrial communication and control system that is made for integrating PLCs and terminal devices. It uses the master-slave technique. An Ethernet port is also equipped for serial communication. The drive has a keypad and graphics terminal as a bridge between the operator and the drive. The drive is certified with the UL, cUL, CE, and EN standards.

The current rating of the Eaton DG1-32012FB-C21C drive is 12.5 Amps with a power rating of 5 Horsepower. An internal EMC filter is present in the drive. A brake chopper is also present in the drive for dynamic braking. The drive comes with a short circuit withstand rating of 100 kAIC. There is a starting delay of 3, 4, or 6 seconds. The output frequency has a rating of 0 to 400 Hertz. For the drive, it has a field weakening point between 20 Hertz and 400 Hertz. The DG1-32012FB-C21C drive comes with different control methods including frequency control, speed control, open loop speed control, and open loop torque control. It comes with an acceleration time and deceleration time of 0.1 to 3000 seconds.