DG1-32075FN-C54C

The DG1-32075FN-C54C drive is an Eaton Cutler-Hammer adjustable variable speed/frequency drive. It is a 3-phase drive with a voltage rating of 208 to 240 Volts AC. The main function of the drive is to regulate the torque and control the speed of 3-phase induction motors by using different control algorithms. It is manufactured with a rated output current of 88 Amps. The drive has a rated power of 22 kilowatts and frequency of 50 Hertz. It is built inside an enclosure with an FR4 frame. It is rated with an IP 54 protection rating. The enclosure of the drive is conformally coated and the enclosure of the drive is fully water-resistant. The DG1-32075FN-C54C drive meets all the requirements of the EMC standards. It is equipped with a C2 + DC choke. For communication, the drive is equipped with an Ethernet/IP, Modbus TCP, Modbus RTU, or a BACnet module.

The DG1-32075FN-C54C drive is equipped with a single-channel digital input for the FWD, REV, external fault, fault reset, preset speed BO, preset speed B1, force remote TI+, and digital output for both contact type and no contact type devices. The drive comes with a network frequency of 45 to 66 Hertz of input and of 0 to 400 Hertz of output. The variable speed drive comes with a range of features including overvoltage/undervoltage protection, input phase supervision, motor phase supervision, unit over temperature, motor stall, motor underload, and surge protection. The DG1-32075FN-C54C drive meets the UL, cUL, CE, C-Tick, RoHS, EAC, and other standards. The environmental temperature should be set between -10 and 50 degrees Celsius for regular operation.