DG1-324D8FB-C21C

The DG1-324D8FB-C21C drive is a 208 to 240 Volts AC drive made by Eaton Cutler-Hammer. It is a 3-phase adjustable frequency drive with constant torque and variable torque. The internal components of the drive are housed inside a NEMA Type 1 rated enclosure with an IP 21 protection rating. The maximum output current rating of the drive is 4.8 Amps. The drive dissipates 0.75 kilowatts of power and it has an output power rating of 1 Horsepower. It is certified with the UL, cUL, CE, and EN standards. The drive uses PWM control and other control algorithms to regulate the speed and torque of induction motor devices. The DG1-324D8FB-C21C drive is equipped with an internal brake chopper circuit. The front panel has an LCD terminal with a keypad. It acts as a communication bridge between the drive and the operators. The drive runs with a maximum frequency of 400 Hertz.

An internal EMC filter is present in the DG1-324D8FB-C21C drive to reduce the transients and electrical noise. The drive meets all the specifications that are required to meet the EMC standards. The internal board of the drive is coated to prevent corrosion. The drive uses a switching frequency range of FR1-3 (1 kHz to 12 kHz) and of FR4-5 (1 kHz to 10 kHz.) It uses the automatic switching frequency feature in case of an overload. The DG1-324D8FB-C21C drive has a frequency reference resolution of 0.1% for the analog input. The drive comes with an acceleration and deceleration time of 0.1 to 3000 seconds. The operating temperature range should be between -10 and 60 degrees Celsius or the drive will be derated. The DG1-324D8FB-C21C drive can be used at up to an altitude of 1000 meters above sea level.