DG1-34140FN-C21C

The Eaton DG1-34140FN-C21C variable frequency drive has a 3-phase in and 3-phase out setup with an input voltage of 230 Volts or 208 to 240 Volts, an output current of 140 Amps, an output power rating of 75 kilowatts (100 Horsepower), and a frequency rating of 50 to 60 Hertz. It has a rated operational current for a switching frequency between 1 to 10 kilohertz and a maximum ambient temperature rating of 50 degrees Celsius for a 150% overload at 140 Amps and one of 40 degrees Celsius for a 110% overload at 170 Amps. It has a built-in interface or field bus module which can be a Modbus RTU, Modbus TCP, BACnet MS/TP, or Ethernet IP module. The drive is fitted with additional PCB protection, a DC link choke, a radio interference suppression filter, and a multi-line graphic display screen.

The Eaton DG1-34140FN-C21C variable frequency drive has been accredited with international certifications such as the EN 61800-5-1, UL 508C, EN ISO 13849-1, EN 62061, IEC 61508, EN 61800-3, cUL List, and UL List certifications. It is also compliant with international standards such as the RoHS, C-Tick, CE Mark, and GoST-R standards. The Eaton DG1-34140FN-C21C variable frequency drive has an IP 21 (NEMA Type 1) enclosure and software with a quick start wizard and active energy control. The ambient operating temperature ranges from -10 to 50 degrees Celsius and the storage temperature is between -40 and 70 degrees Celsius. It has a pollution degree of Degree 2 and overvoltage category of Category III. It requires an altitude from 0 to 1000 meters for operation at full power and an average relative humidity rating of 95% or less with non-corrosive and non-condensing humidity. The Eaton DG1-34140FN-C21C variable frequency drive should be mounted vertically.