DG1-349D0FB-C54C

The DG1-349D0FB-C54C is a variable Frequency Drive (VFD) from Eaton Corporation. This drive has an input voltage rating of 380-500 VAC, 3-phase, and provides an output voltage range of 0-500 VAC, 3-phase. This drive delivers an output current of 9.0 Amperes and output power of 6.0 Horsepower while the drive’s output frequency range is 0-400 Hz. This drive is primarily used to implement modulating control and speed and torque of an industrial AC motor via a variety of configurable control methods such as U/f control, Speed control with slip compensation, Sensorless Vector Control (SVC), and Torque regulation. This drive comes with a variety of integrated communication interfaces for Fieldbus communication such as Modbus RTU, Modbus TCP, BACnet MS/TP, and Ethernet IP while supporting optional communication modules include PROFIBUS, CANopen, DeviceNet, and SmartWire-DT. Through Fieldbus communication, drive operation and parameters integration can be accomplished. The DG1-349D0FB-C54C also comes with embedded Input and output channels which is comprised of Two (2) parameterizable, 0 - 10 V DC, 2 - 10 V DC, -10 - +10 V DC, 0/4 - 20 mA analog inputs; Two (2), parameterizable, 0 - 10 V, 0/4 - 20 mA Analog outputs; Eight (8), fully-programmable, 24 VDC Discrete inputs; One (1), 24 V DC Digital outputs and Three (3) Relay outputs composed of Two (2) changeover contacts and One (1) N/O, 6 A (240 VAC) / 6 A (24 VDC) output contacts. The drive’s control voltage is 24 VDC and the reference voltage of 10 V DC (max. 10 mA).

The DG1-349D0FB-C54C drive is an FS1 frame AC drive. It belongs to the DG1 drive series from Eaton Cutler-Hammer. At 400 Volts AC input voltage and 50 Hertz line frequency, the output power and current ratings are 5.5 kilowatts and 11.5 Amps respectively at a 110% overload. At 500 Volts AC input and 50 Hertz line frequency, the output power and current ratings are 5.5 kilowatts and 9 Amps respectively at a 110% overload. At 480 Volts AC input and 60 Hertz line frequency, the output power and current ratings are 7.5 Horsepower and 11 Amps respectively at a 110% overload. The drive enclosure provides an IP 54 or a NEMA 12 degree of environmental protection. The drive dimensions are as follows: a height of 327 millimeters, a width of 153 millimeters, and a depth of 200.4 millimeters. The industrial Ethernet and RS-485 serial interfaces are available on the DG1-349D0FB-C54C drive. Supported protocols include the TCP/IP, CAN, PROFIBUS, and the Modbus protocols. the integrated drive I/Os include 8 digital inputs, 1 digital output, 2 analog inputs, and 2 analog outputs. The supported mains voltage range is 380 to 500 Volts AC. The supported mains line frequencies include 50 and 60 Hertz. The DG1-349D0FB-C54C drive is designed for 3-phase input. The output voltage is also 3-phase with a maximum output voltage of 480 Volts AC and a maximum output frequency of 400 Hertz. The maximum power output at a quadratic load at the rated voltage is 5.5 kilowatts. The maximum power output at a linear load at the rated output voltage is 8 kilowatts. The nominal output current value is 12 Amps. The current-dependent heat dissipation rating for the DG1-349D0FB-C54C drive is 167 Watts.