The 1232X-BNB-A1G-24 controller is a NEMA 1 rated pump panel from Allen-Bradley/Rockwell Automation. It comes with a disconnect switch. It has a current rating of 27 Amps and it runs with a voltage supply rated at 480 Volts AC. The enclosure of the panel is a 3R waterproof rated enclosure. It can easily and safely be used in outdoor conditions. It is equipped with a 30 Amps rated fuse clips. The current rating of the panel space lies in the range of 5.4 and 27 Amps. It has a E1 and solid-state overload relay for its trip type. The power rating of the device is 10 Horsepower at 460 Volts AC to 575 Volts Ac with an operating frequency rating of 60 Hertz. The connection is made by using a saddle or wire clamp. For contact, the device uses silver alloy power and a silver auxiliary. The 1232X-BNB-A1G-24 pump controller has a shallow installation depth. It is 30 inches in height, 20 inches in width, and 8.72 inches in depth.

The 1232X-BNB-A1G-24 controller is a safety device with a pickup timing of 22 milliseconds and a drop-out timing of 14 milliseconds. It is a common control device without a transformer. The temperature for normal operation lies in between -13 and 131 degrees Fahrenheit. The trip setting of the device lies between 5.7 and 18 Amps. The pump control panel with a disconnect switch has a 10 million operating cycle. It can be operated at up to an altitude of 10,000 feet above sea level without getting derated. This pump control device provides reduced voltage patterns for pump loads.