The 1232X-DNB-26R pump control panel is a NEMA pump control panel that is available through Bulletin 1232X product line by Allen-Bradley/Rockwell Automation. This industrial device belongs to the low voltage starter category and it is made with a disconnect with visible blades or a flange handle that is used with the motor circuit protector. The 1232X product series offers flexibility in regard to the choice of different modifications and accessories for the customization of the unit for a specific application. The 1232X-DNB-26R controller has low power consumption and it provides an impressive set of features for its class. The unit complies with the CSA C22.2 (No. 14) and UL 508 standards. In addition to that, the unit is cULus listed and made for the operating temperatures that are typical for industrial environments.

The 1232X-DNB-26R pump control panel has a NEMA 3 rating for the starter and a narrow Type 3R enclosure made from painted metal. The panel has a fusible disconnect switch that comes with Class R fuse clips. The unit features eutectic alloy overload relays that are combined with 3 heater elements. Besides the eutectic alloy, the overload relays of this type have a manual reset option and they are considered as thermal type overload devices. Overcurrent can lead to overheating so the overload relays serve as protective devices, protecting the motor, power wiring, and motor controller. The 1232X-DNB-26R panel has a 460 to 480 Volts AC voltage rating and an operating frequency of 60 Hertz. The unit also has a maximum power rating of 50 Horsepower for a motor voltage range of 460 to 575 Volts and a line voltage of 480 to 600 Volts. The current rating of the fuse clip is 100 Amps while the continuous current rating is 90 Amps. The unit comes without special options or modifications.