The Eaton Cutler-Hammer S801U36N3S non-combination soft starter is an industrial multifunction reduced voltage soft starter form the S801 series of soft starters that are designed to start, ramp up, and stop 3-phase motors. This starter features a very compact design that allows for easy and simple field retrofitting, and it also features built-in overload protection, programmable overload settings, and built-in run bypass contactors for the control of the inrush current and reduction of the wear on belts, gears, chains, clutches, shafts, and bearings. The S801U36N3S soft starter has a 3-phase operational voltage range of 200 to 600 Volts AC at 47 to 63 Hertz frequency and a maximum current capacity of 360 Amps. It has a standard duty Horsepower rating of 125 Horsepower at 60 Hertz, and a standard ramp time range of 0.5 seconds to 180 seconds.

The S801U36N3S soft starter has an average bypass time of 10 minutes, with 660 Volts AC rated insulation voltage and an overload setting range between 30% and 100% of the full current.  All S801 non-combination soft starters, including the S801U36N3S soft starter, come with 24 Volts DC control voltage that helps to enhance user and equipment safety, and they have 1 relay contact with a 240 Volts AC contactor rating. The S801U36N3S soft starter has a control interface module that allows for easy configuration, which reduces the commissioning time. It has 3-pole wiring and it requires lead add-on lugs for easy field wiring and installation processes. The S801U36N3S soft starter has an operating temperature range of -30 to 50 degrees Celsius, and a storage temperature range between -50 and 70 degrees Celsius. The S801U36N3S soft starter has total mounting dimensions of 196.3 x 323.1 x 179.9 millimeters (W x H x D), and an approximate weight of 21.8 kilograms.