S801V36N3S

The S801V36N3S 3-pole soft starter is an industrial open soft starter by Eaton Cutler-Hammer that is designed to provide smooth and safe starting and stopping to 3-phase motors in critical industrial applications. It has built-in overload protection and a run bypass contactor that gives it a compact design, offers advanced protective functions to give additional motor protection, and makes the installation and setup processes quick and easy. The S801V36N3S soft starter has a voltage rating of 200 to 600 Volts AC, and a maximum current rating of 360 Amps. This soft starter has an impulse withstand voltage rating of 6000 Volts AC and a 660 Volts AC insulation voltage rating. Its overload setting can be programmed from 30 to 100% of the rated current.

The S801V36N3S soft starter has 3 selectable start modes that help provide smooth starts to high-inertia load applications, and a ramp time range of 0.5 seconds to 180 seconds. It also features the soft stop mode for smooth transitioning stops which can prevent damage from sudden stops. The S801V36N3S soft starter has a 24 Volts DC control that helps to enhance user safety. It can be installed in any direction by using factory-supplied mounting plates, and it can be wired easily via lead lug connectors which can be mounted on either the line or load terminals. The S801V36N3S soft starter can operate without derating at -30 to 50 degrees Celsius, and it can be stored at -50 to 70 degree Celsius. Like all S801 starters, this device is suitable for use in rugged environmental conditions. The S801V36N3S soft starter has an average weight of 103 pounds, and total mounting dimensions of 11.03 x 16.57 x 7.23 inches.