S801V50N3S

The S801V50N3S soft starter is a non-combination soft starter from the Eaton Corporation. This 3-pole device has a current rating of 500 Amps. The S801V50N3S soft starter can work with 3-phase motors in a 3-lead (delta) configuration. This soft starter comes supports standard soft-starter overload protection. The working temperature range for the starter is from -40 to 50 degrees Celsius. In storage, the ambient temperature range should be between -50 and 70 degrees Celsius. The starter can perform according to manufacturer specifications when it is installed at a maximum altitude of 2000 meters. At altitudes exceeding 2000 meters, the output derates by 0.5% for every additional 100 meters. The S801V50N3S soft starter weighs 91 pounds and it measures 187.8 x 280.6 x 420.8 millimeters.

The S801V50N3S soft starter is part of the Eaton S801 line of Intelligent Technologies (IT) soft starters. This line of soft starters is designed to have the most compact soft starters available and they can fit existing slots for wye-delta starters, other soft starters, and NEME / IEC starters. Starters from the S801 line can work with motors rated at less than 1 Horsepower and with motors that need 1000 Amps of continuous current. S801 series soft starters can be installed in NEMA 1, 4, 4X and 12 enclosures. The power to the control devices, motor, or controller must be shut off before any work is performed on them or on the S801V50N3S soft starter. Failure to do so can result in injury, death, or equipment damage. Unless it is absolutely necessary, it is not recommended to work on energized equipment. If troubleshooting must be performed on energized equipment, then only qualified technicians should perform the work while following all the recommended safety procedures.