S801V65N3S

The S801V65N3S soft starter is a soft starter with standard overload protection made by the Eaton Corporation. It is an Eaton S801 series soft starter which has a current rating of 650 Amps. The number of poles on the soft starter is 3. The benefits of S801 series soft starters like this one include reduced wear on chains, bearings, belts, and gears, a reduction in inrush current that leads to a stable power grid and low peak demand, enhanced equipment and user safety through 24 Volts DC control, water hammer elimination in pumping applications, and the ability to control the inrush motor current. The S801V65N3S soft starter can be used for the acceleration and deceleration management of 3-phase AC motors. The S801V65N3S soft starter can be used with 3-phase motors with following output power ratings at 50 Hertz frequency: 200 kilowatts of output at 230 Volts AC, 355 kilowatts of output at 380 to 480 Volts AC, and 425 kilowatts of output at 440 Volts AC.

The S801V65N3S soft starter can also be used with 3-phase motors with the following Horsepower ratings at 60 Hertz frequency and 1.0 SF: 250 Horsepower at 200 Volts AC, 250 Horsepower at 230 Volts AC, 500 Horsepower at 460 Volts AC, and 600 Horsepower at 575 Volts AC. It can be installed inside either control centers or NEMA enclosures. The operating temperature range for the S801V65N3S soft starter is from –40 to 122 degrees Fahrenheit. The starter can be used without derating at altitudes of up to 6600 feet. The weight and dimensions of the S801V65N3S soft starter are 41.4 kilograms and 7.4 x 11.01 x 16.5 inches. To prevent shock hazards, all power to the soft starter, connected motor, and other control devices should be disconnected prior to performing any work on the equipment.