SPX010A1-5A4B1

The Eaton SPX010A1-5A4B1 Drive is a Variable Frequency Drive (VFD) that has been designed and manufactured by Eaton Cutler-Hammer for use in a wide range of motion control applications that include conveyor belt systems, agitators, pumps, and machine tools applications. With a weight of 40.8 pounds, an FR6 frame size, and dimensions of 22 inches x 9.3 inches x 7.7 inches (Height x Length x Width), the SPX010A1-5A4B1 Drive is suitable for installation in most industrial panels that are provided with internal air conditioning or forced ventilation systems to prevent the drive from overheating. The Eaton SPX010A1-5A4B1 Variable Frequency Drive is simple to configure and operate through its detachable OLED display or through one of many Fieldbus interfaces for local or remote connection. The available interfaces include the Modbus-TCP, Modbus-RTU, LonWorks, CANopen, DeviceNet, EtherCAT, EtherNet/IP, BACnet MS/TP, PROFIBUS-DP, and the PROFINET interfaces.

A 575 Volts AC rated 3-phase power supply with an output power rating of 10 Horsepower is needed to power the SPX010A1-5A4B1 Drive. The Eaton SPX010A1-5A4B1 Variable Frequency Drive (VFD) has a built-in radio interference suppression filter for protection against harmonics. Another feature of this device is that it protects against regenerated voltages with a brake chopper that converts peak voltages into heat. The I/O integrated into the Eaton SPX010A1-5A4B1 Variable Frequency Drive (VFD) are 2 analog inputs (rated at 0 to 10 Volts DC, 0 or 4 to 20 milliamps), 6 digital inputs (24 Volts DC), 1 digital input, and 1 digital output. Two normally-open relay outputs are also available from the factory so that the users can set up alarms to be controlled directly from the drive. Given its low NEMA protection rate (NEMA Type 1/IP21), it is strongly advised to install the drive inside a properly isolated enclosure to prevent exposure to hazardous substances.