SVX005A1-4A1B1 - In Stock | Eaton Cutler-Hammer Drives SVX 9000 Drives

SVX005A1-4A1B1

Rated 4.9 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

SVX005A1-4A1B1

Description: The SVX005A1-4A1B1 motor control drive is an AC-powered motor control drive with adjustable frequency. It has been designed and manufactured by Eaton Cutler-Hammer as a member of the SVX 9000 series. The SVX005A1-4A1B1 motor control drive operates at 480 Volts AC 3-phase voltage and with an operating frequency range between 50 and 60 Hertz. Its screen is an OLED display screen. The SVX005A1-4A1B1 motor control drive features 8 inputs, 4 outputs, standard boards, a Size FR4 frame, and an internal brake chopper circuit.
In Stock Ships Today
Request a quote for SVX005A1-4A1B1

Description: The SVX005A1-4A1B1 motor control drive is an AC-powered motor control drive with adjustable frequency. It has been designed and manufactured by Eaton Cutler-Hammer as a member of the SVX 9000 series. The SVX005A1-4A1B1 motor control drive operates at 480 Volts AC 3-phase voltage and with an operating frequency range between 50 and 60 Hertz. Its screen is an OLED display screen. The SVX005A1-4A1B1 motor control drive features 8 inputs, 4 outputs, standard boards, a Size FR4 frame, and an internal brake chopper circuit.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the SVX005A1-4A1B1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 17 reviews

    Technical Specifications for SVX005A1-4A1B1

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.SVX005A1-4A1B1
Product TypeAdjustable Frequency Drive
Product FamilyOpen Drives
Horsepower5
EnclosureNEMA Type 1
Voltage 480V
Kepyad TypeAlphanumeric
Input Option3-phase, EMC H
Brake Chopper OptionInternal Brake Chopper Circuit
Board ModificationsStandard Boards
Frame SizeFR4
Supply Frequency50/60 Hz
Inputs2 Analog, 6 Digital
Outputs1 Analog, 1 Digital, 2 Relay
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.SVX005A1-4A1B1
Product TypeAdjustable Frequency Drive
Product FamilyOpen Drives
Horsepower5
EnclosureNEMA Type 1
Voltage 480V
Kepyad TypeAlphanumeric
Input Option3-phase, EMC H
Brake Chopper OptionInternal Brake Chopper Circuit
Board ModificationsStandard Boards
Frame SizeFR4
Supply Frequency50/60 Hz
Inputs2 Analog, 6 Digital
Outputs1 Analog, 1 Digital, 2 Relay
s

About SVX005A1-4A1B1

The SVX005A1-4A1B1 SVX 9000 Adjustable Frequency Drive by Eaton Cutler-Hammer is a 5 Hp industrial drive used for controlling the speed of an industrial motor. The drive has a 3-phase 280-500V AC input voltage at 50-60Hz and it has a maximum short circuit withstand of 100 kAIC. The SVX005A1-4A1B1 drive supplies the connected motor with a voltage ranging between 0 to the drive’s input range at 50°C (122°F), and it can provide about 200% of the starting current boost for 2s at a standard frequency of 0-320Hz and a resolution of 0.01Hz. The drive uses an SVX frequency control (V/f) and an open-loop sensorless vector control with a 1-16 kHz switching frequency, and an Accel/Decel time of 0-300s, with a 30% x Tn default braking torque. The SVX005A1-4A1B1 has 2 configurable analog inputs with 0-10V DC input control voltage at 200kΩ input impedance, and 0-24mA input current at 250Ω and with an accuracy of ±1%. It also has 6 digital inputs with 18-30V DC Logic voltage at 5KΩ resistance, and an auxiliary voltage of +24V at 250mA, with a +10V reference voltage at 10mA. 

The SVX005A1-4A1B1 has 1 programmable 0-20mA, 10-bit analog output with a 500Ω resistance and ±2% accuracy and a 1 (50 mA/48V) open collector digital output with 2 programmable 250V AC 2 Amp or 30V DC2 Amp resistive Form C relay outputs. The SVX005A1-4A1B1 has an internal brake chopper, and it provides overcurrent protection, motor overload protection, motor under-load protection, and short-circuit protection. The drive has a working ambient temperature range of 14-122°F at a relative humidity range of 0-95%, without condensation, and it is designed for storage at a temperature range of –40-158°F. The SVX005A1-4A1B1 is built for use with 100% of its load capacity at an altitude of 3300ft (1000m) without de-rating and is designed to withstand an operational shock of 15G with an operational vibration of 1G at 5-50Hz. It provides easy and convenient operator interface via it alpha-numeric control and configurable keyboard and it is enclosed with a NEMA type 1 rated enclosure. The SVX005A1-4A1B1 has net dimensions of 327mm x 292mm x 190mm (12.9in x 11.5in x 7.5in), and weighs approximately 5Kg (11lb).



Technical Description of SVX005A1-4A1B1

The Eaton Cutler-Hammer SVX005A1-4A1B1 Adjustable Frequency Drive has 5 hp, a 480V Voltage , and a FR4 Frame Size. It also contains 8 Inputs and 4 Outputs.

Repair Services for SVX005A1-4A1B1

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SVX005A1-4A1B1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For SVX005A1-4A1B1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For SVX005A1-4A1B1

Resolutions For SVX005A1-4A1B1

About

Technical Specifications for SVX005A1-4A1B1

ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.SVX005A1-4A1B1
Product TypeAdjustable Frequency Drive
Product FamilyOpen Drives
Horsepower5
EnclosureNEMA Type 1
Voltage 480V
Kepyad TypeAlphanumeric
Input Option3-phase, EMC H
Brake Chopper OptionInternal Brake Chopper Circuit
Board ModificationsStandard Boards
Frame SizeFR4
Supply Frequency50/60 Hz
Inputs2 Analog, 6 Digital
Outputs1 Analog, 1 Digital, 2 Relay
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.SVX005A1-4A1B1
Product TypeAdjustable Frequency Drive
Product FamilyOpen Drives
Horsepower5
EnclosureNEMA Type 1
Voltage 480V
Kepyad TypeAlphanumeric
Input Option3-phase, EMC H
Brake Chopper OptionInternal Brake Chopper Circuit
Board ModificationsStandard Boards
Frame SizeFR4
Supply Frequency50/60 Hz
Inputs2 Analog, 6 Digital
Outputs1 Analog, 1 Digital, 2 Relay

About SVX005A1-4A1B1

The SVX005A1-4A1B1 SVX 9000 Adjustable Frequency Drive by Eaton Cutler-Hammer is a 5 Hp industrial drive used for controlling the speed of an industrial motor. The drive has a 3-phase 280-500V AC input voltage at 50-60Hz and it has a maximum short circuit withstand of 100 kAIC. The SVX005A1-4A1B1 drive supplies the connected motor with a voltage ranging between 0 to the drive’s input range at 50°C (122°F), and it can provide about 200% of the starting current boost for 2s at a standard frequency of 0-320Hz and a resolution of 0.01Hz. The drive uses an SVX frequency control (V/f) and an open-loop sensorless vector control with a 1-16 kHz switching frequency, and an Accel/Decel time of 0-300s, with a 30% x Tn default braking torque. The SVX005A1-4A1B1 has 2 configurable analog inputs with 0-10V DC input control voltage at 200kΩ input impedance, and 0-24mA input current at 250Ω and with an accuracy of ±1%. It also has 6 digital inputs with 18-30V DC Logic voltage at 5KΩ resistance, and an auxiliary voltage of +24V at 250mA, with a +10V reference voltage at 10mA. 

The SVX005A1-4A1B1 has 1 programmable 0-20mA, 10-bit analog output with a 500Ω resistance and ±2% accuracy and a 1 (50 mA/48V) open collector digital output with 2 programmable 250V AC 2 Amp or 30V DC2 Amp resistive Form C relay outputs. The SVX005A1-4A1B1 has an internal brake chopper, and it provides overcurrent protection, motor overload protection, motor under-load protection, and short-circuit protection. The drive has a working ambient temperature range of 14-122°F at a relative humidity range of 0-95%, without condensation, and it is designed for storage at a temperature range of –40-158°F. The SVX005A1-4A1B1 is built for use with 100% of its load capacity at an altitude of 3300ft (1000m) without de-rating and is designed to withstand an operational shock of 15G with an operational vibration of 1G at 5-50Hz. It provides easy and convenient operator interface via it alpha-numeric control and configurable keyboard and it is enclosed with a NEMA type 1 rated enclosure. The SVX005A1-4A1B1 has net dimensions of 327mm x 292mm x 190mm (12.9in x 11.5in x 7.5in), and weighs approximately 5Kg (11lb).



Technical Description of SVX005A1-4A1B1

The Eaton Cutler-Hammer SVX005A1-4A1B1 Adjustable Frequency Drive has 5 hp, a 480V Voltage , and a FR4 Frame Size. It also contains 8 Inputs and 4 Outputs.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SVX005A1-4A1B1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SVX005A1-4A1B1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF