SVX020A2-4A1B1

The SVX020A2-4A1B1 drive has a voltage rating of 480 Volts AC and it comes in a conformally-coated FR6 frame body. It is part of the SVX 9000 series from Eaton Cutler-Hammer and it is a compact solution for handling variable speed requirements. For braking, the drive is equipped with an internal brake chopper circuit. It is a cost-effective solution for braking. The drive runs with 50 to 60 Hertz frequency. The enclosure of the drive is a non-water-resistant NEMA Type 12 enclosure. The total power output of the drive is 20 Horsepower. The SVX020A2-4A1B1 drive has a current rating of 31 Amps. This 3-phase drive has dimensions of 22 inches in height, 7.6 inches in width, and 9.3 inches in depth. The drive weighs 40 pounds. The drive works on the open-loop vector control method. For regulating and controlling speed requirements, the drive uses the Sensorless vector control method, which is a control algorithm. This algorithm works with the system of stator flux coordinates.

Using the Sensorless vector control method, the SVX020A2-4A1B1 drive is able to achieve a steady-state speed error of less than 0.5%. It has a high starting current of 220% of the motor rating. It is suitable for multi-motor drive systems and high-speed applications. The SVX020A2-4A1B1 drive has no AC line regenerative. The front panel of the drive is equipped with an operator control panel. The panel has a small display and an alphanumeric keypad. The display can show 3 lines of information at a time. For internal communication, the SVX020A2-4A1B1 drive uses a field bus connection. The drive meets the EMC specifications and other safety requirements. The drive is certified with the ROHS and ISO 9001 standards. The ambient temperature for 150% overload operation lies in between -10 and 50 degrees Celsius. The drive is also equipped with a radio interference suppression filter.