SVX050A1-2A1N1

The Eaton Cutler-Hammer SVX050A1-2A1N1 variable frequency drive is a 3-phase device. The SVX050A1-2A1N1 drive is an SVX series industrial drive which can generate an output of 50 Horsepower with a regular load. The drive can be configured by using standard software from the AFD software series. The drive has a NEMA Type 12 enclosure which is not water-resistant. The drive has a voltage rating in the range of 209 to 230 Volts AC. To enter input information into the drive, 2 analog and 6 digital inputs are used. The frame of the variable frequency drive is FR8. The SVX050A1-2A1N1 drive uses a standard control board. This drive is a performance drive and it works with open-loop vector control. It is a compact modular solution which can meet the speed requirements of various applications. It uses the sensorless vector control algorithm.

The SVX050A1-2A1N1 drive comes with a human-machine interface module on the front side of the drive. The module has an alphanumeric keypad which is used to feed input into the drive. An LCD is present which can show different status messages, including RUN, STOP, READY, ALARM, and FAULT. Navigation keys are also available on the keypad. No brake chopper is available in this drive variant. The drive can be mounted side by side or it can be stacked vertically. When drives stacked together, clearance should be provided between the drives and the outlet air used for cooling the lower unit must be directed away by the upper unit. The ambient operating temperature of SVX050A1-2A1N1 drive ranges from -10 degrees Celsius to 50 degrees Celsius. The installation environment should also match the air quality of the class 3S2 and 3C2 standards. The drive features different protective features. It comes with overcurrent and undervoltage protection. It also has a ground fault, input phase, motor phase, and overtemperature protection.