The W201K1CF contactor is a Class W201 non-reversing contactor manufactured by Eaton Cutler-Hammer. The W201K1CF contactor features a voltage rating of 200 Volts AC and the Horsepower rating is 7.5 Horsepower. The unit also features a continuous current rating of 27 Amps and the coil voltage is 120/60 (Hertz/Volts). The W201K1CF contactor is a 3-pole contactor and it comes with a weight of 2 pounds, and a width of 2.5 inches, a height of 6.5 inches, and a depth of 4.84 inches. The W201K1CF contactor is a non-reversing contactor. The W201K1CF contactor and other Eaton Class W201 contactors do not include the overload, phase loss, phase imbalance, or the ground current sensing protection features. The W201K1CF contactor features a similar coil controller to other contactors with the same classification. The coil controller protects the contactor from a “contact kiss” scenario on the pickup or a dropout scenario when the coil voltage supply has dropped.

The W201K1CF contactor features advanced architecture that delivers a long life. This is because the unit comes with minimal contact bounce. The W201K1CF contactor also comes with an innovative design, which has a small physical size compared to the conventional contractors. This allows the unit to fit well into small enclosures and it uses a small control panel box. The W201K1CF contactor features the solid-state overload relay. This is a standard protection feature that ensures phase loss protection and unbalanced selectable trip class protection. It is effective for an automatic/manual reset and also for ground current sensing. The Eaton Cutler-Hammer contactors like this one come with advanced communication capabilities. This contactor features operational switches and status monitoring capabilities.