The W201K2CF contactor is a none-reversing W201 contactor designed and engineered by Eaton Cutler-Hammer. The W201K2CF contactor features a power voltage rating of 200 Volts AC and it has a maximum Horsepower rating of 10 Horsepower. The W201K2CF contactor is an open type of FVNR contactor, that features a significantly smaller contact bounce in the regulated power sent to the coil than other contactors have. This feature ensures the elimination of coil burnout. With a small size, the W201K2CF contactor uses smaller enclosures and control panel boxes than most contactors. The unit comes with the solid-state overload relay with the standard protection features including the phase loss and unbalance protection and a selectable trip class. The W201K2CF contactor features low-cost communication capabilities. The unit comes with the ON/OFF commands, and the status and the motor data are able to be linked to the automated control systems. Because it is a microprocessor-based contactor, the W201K2CF contactor does not close on low control voltage, and the armature closing speed is easily controlled to minimize the contact bounce.

 With optimized coil power, the W201K2CF contactor provides a high level of contact force despite a small physical size. The high contact force ensures an extended electrical life. For minimized generation of heat, the unit uses current sensors instead of heaters. This ensures that the temperature rise in the overload relay is effectively eliminated. Therefore, the low level of coil holding power ensures that there is reduced heating in the magnet coil. The W201K2CF contactor features the Advantage Control modules that provide a cost-effective alternative to pushbuttons. It comes with the selector switches and indicating lights with a reset mechanism and panel meters. This simple plug-in unit ensures that there is minimal installation effort.