The W201K3CF contactor is a W201 none-reversing contactor manufactured by Eaton Cutler-Hammer. The W201K3CF contactor features a continuous amperage rating of 90 Amps and it has a Horsepower rating of 25 Horsepower maximum. The W201K3CF contactor features a power voltage of 200 Volts AC and it is a 3-pole W201 contactor. The W201K3CF contactor features a width of 3.68 inches, a height of 8.0 inches, and a depth of 6.49 inches, while the shipping weight is 6 pounds. The W201K3CF contactor features the distributed opening function that allowing the contactor to store data about the order in which the phases were opened after the previous stop. This is then followed by the rotation of the opening sequence between the phases in order to ensure even contact wear. The W201K3CF contactor supports the unique current sensor that puts out a voltage value that is proportional to the change in the current value. It comes with the SURE CHIP square that integrates the value in order to achieve the true measure of the motor temperature.

The W201K3CF contactor also features the snap-in mounting mechanism on the 35-millimeter DIN rail. It is ideal for allowing a direct retrofit of the competitive none-reversing contactors. The W201K3CF contactor also eliminates the need for re-drilling and tapping the mounting holes, and it comes with a simplified mounting process. The relative humidity range is 5 to 95%, non-condensing, while the ambient operating temperature range is rated at 0 to 40 degrees Celsius. The W201K3CF contactor features an ambient storage temperature range of -20 to 85 degrees Celsius, and it also features a NEMA enclosure for protection. The contactor also supports a simplified status communication process that allows for easy monitoring of the contactor’s performance.

This content was written and compiled by DO Supply and should not be copied.