Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Eaton Cutler-Hammer FAZ Series FAZ-C10/2-NA

Product image is representative; revision or series may vary. Contact us to request a specific version.

FAZ-C10/2-NA

|
Need a Specific Revision?

The FAZ-C10/2-NA from Eaton Cutler-Hammer is a miniature circuit breaker characterized by its efficiency in protecting electrical circuits. This model operates at a current rating of 10.0 A and can handle voltages of 277/480 VAC and 48/96 VDC.

Ships Tomorrow.
2 Year DO Supply Warranty
In Stock
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for FAZ-C10/2-NA

ManufacturerEaton Cutler-Hammer
Product TypeMiniature Circuit Breaker
Product LineFAZ Series
Part NumberFAZ-C10/2-NA
Number of Poles2 Poles
Current Rating10.0 A
Voltage Rating (AC)277/480 VAC
Voltage Rating (DC)48 VDC / 96 VDC
Trip CurveC Curve
Interrupt Rating at 277/480 VAC10 kAIC
Interrupt Rating at 240 VAC14 kAIC
Mounting TypeDIN Rail Mount
DIN Rail Width35 mm
Terminal TypeScrew Clamps
Min. Frequency50 Hz
Max. Frequency60 Hz
Request a Repair

The Eaton Cutler-Hammer FAZ-C10/2-NA is classified as a miniature circuit breaker, ideal for safeguarding electrical systems from overloads and short circuits. With a current rating of 10 A, this breaker is rated for AC voltage levels of 277/480 VAC and can also manage DC voltage inputs of 48 VDC and 96 VDC. This versatility makes it suitable for diverse applications.

This specific breaker is configured with 2 poles, providing necessary separation in different circuit setups. It has a defined trip curve type, classified as C, which is designed for moderate inrush current applications. Interrupt ratings are noteworthy, with 10 kAIC for 277/480 VAC and 14 kAIC at 240 VAC, ensuring robust protection against fault conditions.

Installation is straightforward, as the FAZ-C10/2-NA is designed for DIN rail mounting, fitting standard 35 mm rail widths. The terminal connections are secured using screw clamps, which facilitate reliable wiring without the need for specialized tools. Operating at frequencies ranging from 50 Hz to 60 Hz allows it to perform effectively in typical electrical environments.