FP5200-10

The FP5200-10 feeder protection module has been designed by Eaton Cutler-Hammer and it is part of the Eaton FP-5000 Feeder Protection series. The unit is used for a wide range of applications and it features various protective capabilities. This feeder protection module is built on microprocessor technology and it provides functions like self-checking for the hardware parts, programmable logic control functions, phase overcurrent, and the secure storage of important information when electrical faults or disturbances occur. The FP5200-10 feeder protection module comes in a compact housing for protection and it features a drawout case design. This feeder protection module supports a detailed fault analysis through trip logs, event logs, and waveform capture alone with an advanced system restoration process.

The FP5200-10 feeder protection module has a maximum power consumption rating of 20 Volt-Amps and it incorporates INCOM technology for communication. The fixed baud rate for communications is 9600 Baud and the maximum distance for communications is 3048 meters or 10,000 feet. The module has 5 Amps of current rating and a control voltage rating of 100 to 240 Volts AC/DC. It  has a phase angle of 1 to 60 degrees and a slip frequency range of 0.1 to 2 Hertz. The voltage differential is 1 to 100 Volts and the breaker close time is 0 to 9999 cycles. The approximate weight of the module is 5.7 kilograms (12.5 pounds). The front dimensions of the unit include a height of 288 millimeters (11.3 inches), a width of 196.1 millimeters (7.7 inches), and a depth of 20.3 millimeters (0.8 inches). The rear dimensions are 170.2 x 134.6 x 175.3 millimeters (6.7 x 5.3 x 6.9 inches). The FP5200-10 feeder protection module features 8 discrete contact inputs along with 5 Form A output contacts and 2 Form C output contacts. The module operates at altitudes of up to 2500 meters (6350 feet) and in temperature ranges that are typical for industrial applications.