Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Eaton Cutler-Hammer FP5000 Feeder Protection FP5300-00

Product image is representative; revision or series may vary. Contact us to request a specific version.

FP5300-00

|
Need a Specific Revision?

The FP5300-00 feeder protection module is part of the FP-5000 Feeder Protection series and it is designed and manufactured by Eaton Cutler-Hammer. The module features a control voltage of 48 to 125 Volts AC/DC and it has a current rating of 1 Amp. The unit also features INCOM communications and a draw-out design. The maximum power consumption rating of the unit is 20 Volt-Amps and the communications baud rate is 9600 Baud (fixed). The unit is approved by the UL, UL 1053, ANSI C37.90, and EN 55011 series.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for FP5300-00

ManufacturerEaton Cutler-Hammer
CategoryPLCs
Product LineFP5000 Feeder Protection
Part NumberFP5300-00
Weight10.69 lbs (4.85 kg)
Current Range1 Amp
PackagingDraw-out
Control Voltage48 to 125 Volts AC/DC
Communications ProtocolINCOM
Maximum Power Consumption20 Volt-Amps
Communications Baud Rate9600 Baud (Fixed)
Maximum Distance for Communications3048 Meters (10,000 Feet)
Operating Temperature-40 to 60 degrees Celsius (-40 to 140 degrees Fahrenheit)
Storage Temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Standards and CertificationsUL, UL 1053, ANSI C37.90, EN 55011, and EN 61000-6-2
Request a Repair

The catalog number FP5300-00 is used for an Eaton Cutler-Hammer component intended for feeder protection. This feeder protection module is part of the FP-5000 series and it has an impressive set of features that allow the users to install the device into a variety of systems. The module features a current rating of 1 Amp and voltage rating of 48 to 125 Volts AC/DC. The FP5300-00 feeder protection module uses the INCOM protocol for communications and it has a baud rate of 9600 Baud. This feeder protection module can be used with different types of communication software provided by Eaton. The available software packages are the PowerPort and the PowerNet software packages. These software solutions can be used for various configurations and customizations for the FP5300-00 feeder protection module.

The FP5300-00 feeder protection module consumes up to 20 Volt-Amps of power and it has an interruption ride-through time of 20 cycles in regard to the nominal AC supply. The module complies with standards like the UL 1053, ANSI C37.90, EN 55011, and the EN 61000-6-2 standards for immunity and emission tests. Additionally, it should be mentioned that the FP5200-00 feeder protection module includes logic and control functions such as programmable logic gates, 2 latching gates, and 6 timer gates for delays in the on and off states. The maximum supported distance for INCOM communications is 3048 meters or 10,000 feet. The environmental ratings of the module include an operating temperature range of -40 to 60 degrees Celsius (-40 to 140 degrees Fahrenheit) and a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). In addition to that, the unit operates at non-condensing relative humidity levels between 5 and 95%.