91-00992-01 | Eaton Cutler-Hammer Panelmate Panelmate 92**

91-00992-01

91-00992-01

Description:

The 91-00992-01 terminal is a PanelMate operator terminal by Eaton. This CRT module has a voltage rating of 110 to 230 Volts AC.

Rated 4.7 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 91-00992-01

Add more parts to quote

Description:

The 91-00992-01 terminal is a PanelMate operator terminal by Eaton. This CRT module has a voltage rating of 110 to 230 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 91-00992-01.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 20 reviews

    Technical Specifications for 91-00992-01

BrandEaton Cutler-Hammer
SeriesPanelMate 92**
Part Number91-00992-01
DescriptionOperator Interface terminal
Resolution640 x 480 pixels
Voltage110/230 Volts AC
Frequency50/60 Hertz
ProcessorMotorola 68020
Storage1 MB Flash
Baud rate110 to 38400 baud
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 91-00992-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-01 units instead of migration.

BrandEaton Cutler-Hammer
SeriesPanelMate 92**
Part Number91-00992-01
DescriptionOperator Interface terminal
Resolution640 x 480 pixels
Voltage110/230 Volts AC
Frequency50/60 Hertz
ProcessorMotorola 68020
Storage1 MB Flash
Baud rate110 to 38400 baud
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 91-00992-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-01 units instead of migration.

s

About 91-00992-01

The 91-00992-01 terminal is a single-phase device by Eaton Cutler-Hammer. It is a CRT operator interface module or terminal. The resolution of the module is 640 x 480 pixels. The voltage rating of the CRT module is 110 to 230 Volts AC with a frequency of 50 to 60 Hertz. The front panel of the module has a display unit along with buttons and keys. It is equipped with numerical keys for entering different values and buttons for different functions. The buttons are used to execute different functions that are assigned to them during the running of the module. The back of the module comes with different ports that can be used to extend the functionality of the CRT module. It contains an audio output port, a keyswitch port, and a fault relay port.



 



The 91-00992-01 terminal is also equipped with 2 serial ports labeled as poers 1 and 2 that can be used to add peripheral devices, including a printer or a personal computer. These ports have a selectable baud rate from 110 to 38,400 baud. It also has a Power On/Off button on the back. The 91-00992-01 terminal comes with a VCP unit self-test diagnostic feature that runs during the starting of the monitor. It verifies whether the Video Frame buffer, character cell RAM, and the watchdog feature are working or not. The module is equipped with a real-time clock/battery for calendar and time purposes. The module supports different serial transfer modes and network transfer modes. The 91-00992-01 terminal is equipped with a Motorola 68020 processor along with 1 MB of flash memory for program storage, and for storing fonts and messages.



Repair Services for 91-00992-01

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 91-00992-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 91-00992-01

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 91-00992-01

Resolutions For 91-00992-01

About

Technical Specifications for 91-00992-01

BrandEaton Cutler-Hammer
SeriesPanelMate 92**
Part Number91-00992-01
DescriptionOperator Interface terminal
Resolution640 x 480 pixels
Voltage110/230 Volts AC
Frequency50/60 Hertz
ProcessorMotorola 68020
Storage1 MB Flash
Baud rate110 to 38400 baud
Product Lifecycle Status*Discontinued/Obsolete
BrandEaton Cutler-Hammer
SeriesPanelMate 92**
Part Number91-00992-01
DescriptionOperator Interface terminal
Resolution640 x 480 pixels
Voltage110/230 Volts AC
Frequency50/60 Hertz
ProcessorMotorola 68020
Storage1 MB Flash
Baud rate110 to 38400 baud
Product Lifecycle Status*Discontinued/Obsolete

*The Eaton Cutler-Hammer 91-00992-01 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 91-00992-01 units instead of migration.

About 91-00992-01

The 91-00992-01 terminal is a single-phase device by Eaton Cutler-Hammer. It is a CRT operator interface module or terminal. The resolution of the module is 640 x 480 pixels. The voltage rating of the CRT module is 110 to 230 Volts AC with a frequency of 50 to 60 Hertz. The front panel of the module has a display unit along with buttons and keys. It is equipped with numerical keys for entering different values and buttons for different functions. The buttons are used to execute different functions that are assigned to them during the running of the module. The back of the module comes with different ports that can be used to extend the functionality of the CRT module. It contains an audio output port, a keyswitch port, and a fault relay port.



 



The 91-00992-01 terminal is also equipped with 2 serial ports labeled as poers 1 and 2 that can be used to add peripheral devices, including a printer or a personal computer. These ports have a selectable baud rate from 110 to 38,400 baud. It also has a Power On/Off button on the back. The 91-00992-01 terminal comes with a VCP unit self-test diagnostic feature that runs during the starting of the monitor. It verifies whether the Video Frame buffer, character cell RAM, and the watchdog feature are working or not. The module is equipped with a real-time clock/battery for calendar and time purposes. The module supports different serial transfer modes and network transfer modes. The 91-00992-01 terminal is equipped with a Motorola 68020 processor along with 1 MB of flash memory for program storage, and for storing fonts and messages.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 91-00992-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 91-00992-01. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF