92-00556-07

The Eaton 92-00556-07 interface is an operator interface that belongs to the PanelMate 92** series. This interface provides a touchscreen display that shows the current application phases that the connected PLC is going through. Operators can use this interface to control the PLC and be informed about the current status of their equipment and the application process. The PanelMate interfaces made by Eaton Cutler-Hammer are known for their innovative graphics, templates, and their space-saving capabilities. The Eaton Cutler-Hammer 92-00556-07 operator interface operates with a voltage range of 110 to 230 Volts AC and a frequency of 50 to 60 Hertz. This interface comes with the protective housing that can be mounted on a floor, a wall, or a panel and it can be installed in a rack or a more protective enclosure. This makes the interface versatile enough to be used and installed according to different application requirements. This interface also provides data transfers between other interfaces and equipment through the use of an EEPROM cartridge.

The Eaton Cutler-Hammer 92-00556-07 operator interface has an approximate weight of 22 pounds and the following dimensions: a height of 48.3 centimeters, a width of 38.1 centimeters, and a depth of 40.6 centimeters. The interface can withstand harsh environments and a maximum temperature of 50 degrees Celsius as well as a relative humidity level of 5 to 95 percent without condensation. It is important to preserve these conditions so the normal lifespan of the interface can be maintained. The Eaton Cutler-Hammer 92-00556-07 operator interface comes with a hardware manual and one shipping kit that includes accessories such as a packet of mounting nuts and washers, 2-terminal connectors, a 3-terminal connector, and a cutout torque drawing.