92-01262-07

The Eaton Cutler-Hammer 92-01262-07 PanelMate 92** Operator Interface Terminal is more flexible and cost-effective than hardwired operator control panels. The PanelMate terminal has replaced individual control devices (including message display units, selector switches, analog meters, digital readouts, thumbwheels, pushbuttons, and indicating lights) by the use of a single serial connection. The capabilities of the PanelMate terminal graphics offer functionalities that used to be carried out by CRT- based gadgets. Before installing the Eaton Cutler-Hammer 92-01262-07 PanelMate 92** Operator Interface Terminal, the users may run some tests in their industrial enclosure to verify the system health. The test procedure includes first connecting the unit to a 24 Volts DC power source and the unit will immediately turn on. The second step is checking the demonstration screens. The third step is carrying out the system diagnostics by performing display tests and keypad tests. The last step is to enter the run mode which allows for communication between the selected PLC and the 92-01262-07 PanelMate92** Terminal.

The Eaton Cutler-Hammer 92-01262-07 PanelMate 92** Operator Interface Terminal has a serial port with a selectable baud rate between 110 and 19,200 baud, and it has a DB9S (Socket) and it is selectable for the RS-422 or the RS-232 signal levels. The terminal has conformed to the international industrial noise immunity standards such as the IEC-801-6, IEC-801-3, IEC-801-2, and the IEC-801-4 noise immunity standards. It also has a Degree 1 pollution rating. The terminal has an ambient operating temperature range of 0 to 50 degrees Celsius and ambient storage temperature range of -20 to 60 degrees Celsius. It has a tolerable relative humidity level between 20% and 85%, non-condensing, and a maximum operating altitude of 10,000 feet ASL. The operator interface terminal has an operating shock rating of 15 G and a vibration rating of 2 G at 10 to 500 Hertz.