92-01263-09

The Eaton Cutler-Hammer 92-01263-09 Operator Interface Terminal has a power voltage range between 18 and 30 Volts DC and 11.5 Volts-Amps (VA) of power. The users can check the system's health before installing it in an industrial enclosure. There are procedures that need to be followed when setting up the terminal. First, connect the terminal to an AC power source and ensure that the terminal is powered off. Second, connect the audio feedback kit asan optional accessory. Third, link the security keyswitch to the unit. Fourth, switch the PanelMate92** Terminal on. Lastly, perform the system diagnostics by setting the time and date, conducting a keypad test, conducting a display test, and confirming the audio output, check fault relay, and battery settings. The Eaton Cutler-Hammer 92-01263-09 Terminal can carry out diagnostics by using the control button labeled "Get Page." Then the users can select the "More Control" button and opt for the "Enter Offline Mode" option. Finally, the users can press the "Execute Control" button to show the menu for the Offline Mode.

The Eaton Cutler-Hammer 92-01263-09 PanelMate92** Operator Interface Terminal has an ambient operating temperature range from 0 to 50 degrees Celsius and a storage temperature range from -20 to 60 degrees Celsius. it has a maximum operating altitude of 10,000 feet above sea level at full power and it can tolerate a non-condensing relative humidity level ranging from 20% to 95%. The Eaton Cutler-Hammer 92-01263-09 PanelMate92** Operator Interface Terminal has a NEMA protection class of 4 or 12 if it is correctly mounted and installed in an industrial environment with a maximum pollution rating of Pollution Degree 1, which means it can only be exposed to dry or to non-conductive pollutants.