92-01670-01

The 92-01670-01 terminal is an industrial operator control panel which is part of the Panelmate 92** series. The input voltage rating for the 92-01670-01 terminal is 24 Volts DC and the current drawn by the device is 0.5 Amps. The peak inrush current is 35 Amps with a maximum duration of 15 microseconds. The maximum power consumption rating is 12 Watts. The 92-01670-01 terminal includes 2 serial ports. Serial Port 2 supports only RS-232 communication. The other serial port is Serial Port 1 and it has 2 physical RJ-11 interfaces. One interface supports RS-232 communication and the other interface supports RS-422/485 communication. However, only one of these 2 physical interfaces can be used at a time. The baud rate for the serial ports is configurable and it can be set between 110 and 19,200 baud.

The display on the 92-01670-01 terminal supports touchscreen technology and it can be used for operator input and control. The backlight on the display can be replaced in the field. The processor powering the 92-01670-01 terminal is a 16-bit microprocessor clocked at 16 Megahertz. A battery-backed NVRAM is available on the 92-01670-01 terminal with a 10-year rated operating life for the lithium battery. The weight of the unit is 5 pounds. The terminal generates 41 BTU per hour as heat. The recommended temperature range for the storage of the 92-01670-01 terminal is -20 to 60 degrees Celsius. The operating temperature range is from 0 to 50 degrees Celsius. Attempting to operate the 92-01670-01 terminal outside this temperature range can significantly shorten the operational life of the unit. The relative humidity levels around the unit should not fall outside of the 20 to 80% range. The 92-01670-01 terminal has a NEMA 4X protection rating when it is mounted properly in the correct enclosure.