The Eaton Cutler-Hammer 92-01672-01 control panel is a video control panel. The 92-01672-01 control panel belongs to the Panelmate 92** series. The 92-01672-01 control panel can be used in industrial applications for PLC and control system programming and maintenance. A touchscreen display is provided on the 92-01672-01 control panel for operator input. The shipment containing the 92-01672-01 control panel includes a hardware user guide and a shipping kit which contains one 3-terminal connector, one cutout drawing, and one packet of 10 mounting nuts and washers. A PLC cable and a serial cable, if ordered as accessories, will be packaged separately. It is advisable to test the 92-01672-01 control panel before using it in an industrial enclosure. This test involves powering up the unit and executing the system diagnostics for the offline mode on the system menu.

The 92-01672-01 control panel requires DC input power. The system is compatible with 24 Volts DC voltage and it draws a maximum current of 0.5 Amps with communication modules installed. The 92-01672-01 control panel is designed to be mounted inside an industrial enclosure. The dimensions of the 92-01672-01 control panel are 10.51 x 2.42 x 7.68 inches. A cutout measuring 9.82 x 6.5 inches is required for unit installation. The weight of the 92-01672-01 control panel is 4 pounds. The 92-01672-01 control panel is based on a 16-bit microprocessor running at 16 Megahertz. The rated life for the battery which provides backup power for the NVRAM is 10 years. Two serial ports are provided on the 92-01672-01 control panel. Both serial ports have RJ-11 interfaces. Serial Port 1 supports RS-232 communication while Serial port 2 supports both RS-422/485 and RS-232 communication. The baud rate for the serial ports is configurable between 110 baud and 19.2 kilobaud.