92-01684-00

The 92-01684-00 terminal is an Eaton Cutler-Hammer Panelmate 92** series industrial operator interface terminal. The 92-01684-00 interface terminal is designed for deployment in industrial settings where it can be used to replace legacy control systems that use individual devices such as lamps and pushbuttons which are hard-wired to the I/O points. The 92-01684-00 interface terminal can perform all the control and monitoring functions performed by legacy systems and it can also perform numerous additional functions. This electronic industrial interface terminal usually occupies less space than older control systems, it is flexible and customizable, and it can be upgraded through enhanced software. The 92-01684-00 interface terminal has a monochrome LCD screen which supports a VGA (320 x 240) resolution. The terminal is based on a 16 Megahertz Motorola 68340 microcontroller. A serial port is available on the unit and it can be configured for RS-232 or RS-422 communication depending upon user requirements.

The Baud rate for the serial port is selectable, and the minimum baud rate setting is 110 baud while the maximum baud rate setting is 19.2 kilobaud. The rated nominal input voltage is 24 Volts DC and the maximum power consumption rating is 12 Watts. Polarity reversal will not damage the 92-01684-00 interface terminal. The rated inrush current is 35 Amps which can last for up to 15 microseconds. The recommended minimum wire size for DC power connections is 0.82 millimeters squared. The approximate weight of the 92-01684-00 interface terminal is 4 pounds. The unit dimensions are approximately 9.0 x 1.92 x 7.8 inches. The recommended torque for the number 6-32 nuts used to mount the system is 5 pounds on an inch. Eaton Cutler-Hammer recommends using a cutout measuring 6.63 x 7.7 inches for the installation of the unit.