92-01701-05

The Eaton 92-01701-05 control panel is a Panelmate 92** video control panel with a display screen, and a keypad for operator input. In addition to Panelmate 92** control panel itself, the package from the manufacturer contains a user manual, a cutout drawing, a 3-terminal connector for DC power, and a packet of twelve #8 mounting nuts and washers. If a PLC cable is ordered from Eaton Cutler-Hammer, it will be in a separate package. The DC power receptacle is located on the bottom of the 92-01701-05 control panel. The terminal operates at 24 Volts DC and draws a maximum of 12 Watts of electrical power. The DC input common and the chassis ground are internally connected to the terminal chassis. Power conditioning may be required in high-noise environments.

The dimensions of the 92-01701-05 control panel are 12 x 2.5 x 11 inches and the unit weighs 11 pounds. The recommended size for the cutout that is needed to install the unit is 10 x 11 inches. The main processor on the 92-01701-05 control panel is a 16-bit microprocessor clocked at 16 Megahertz. The standard capacity units include 2 Megabytes of DRAM and the high capacity units include 3 Megabytes of DRAM. The terminal also includes battery-backed NVRAM. The minimum rated operational life of the battery is 10 years. The 92-01701-05 control panel comes with 2 serial ports. Serial Port 2 supports RS-232 communication while Serial Port 1 supports both RS-232 and RS-422/485 communication. Only one Serial Port 1 connection can be used at a time. Using both Serial Port 1 connections at the same time can cause communication errors which may lead to PLC malfunctioning. The operating temperature range for the 92-01701-05 control panel is 0 to 50 degrees Celsius.