92-01798-04

The Eaton Cutler-Hammer 92-01798-04 human-machine interface or HMI is made for industrial applications that require sturdy human-machine interfaces that allow the operators to have quick access to application process data, activation and deactivation buttons, trend graphics, and many other functions in 1 place. No difficult maintenance and troubleshooting needs to be used with this interface. The users only need to harness the power of serial communications and industrial networks for quick plug and play, product commissioning of the interface. The Eaton Cutler-Hammer 92-01798-04 industrial operator interface needs a power source that delivers 24 Volts DC rated voltage and 12 Watts of power and it has an estimated current of 1.1 Amps.  If properly mounted on a stainless steel panel by using the factory-supply installation hardware, the HMI can withstand direct exposure to water and other contaminants for short periods.

The information from the application process can be edited on a Windows PC by using Eaton Cutler-Hammer proprietary software and downloaded to the Eaton Cutler-Hammer 92-01798-04 industrial operator interface through a serial transfer cable that is sold separately. This serial transfer cable has an RJ-11 port on one end and a 9-pin connector on the other, and when the PC has a 25-pin serial connection port, the cables for it can be easily constructed by using the information provided in the product manual. Maintenance procedures for the Eaton Cutler-Hammer 92-01798-04 industrial operator interface are very simple, and they include cleaning the touchscreen from time to time by using non-abrasive products, keeping the ventilation vents free of obstacles, and removing  accumulated dust by using low-pressure air. All maintenance work should be performed by properly trained technicians.