The Eaton/Cutler-Hammer PanelMate 92** 92-01810-02 interface is an operator interface that has been designed for installation in Type 12 or Type 4 rated enclosures, and it is capable of withstanding harsh environmental conditions if the panel that it is mounted on has been provided with a climate control system or forced ventilation .  Like the DC-powered members of the PanelMate 92** family, the Eaton/Cutler-Hammer 92-01810-02 operator interface comes with 2 serial ports that are labeled as Serial Port 1 and Serial Port 2, and it is made for configuration through proprietary Eaton software by using a personal computer or a serial network. Additionally, the Eaton-Cutler Hammer 92-01810-02 PanelMate 92** operator interface comes with 2 relay outputs, one with a range of 0 to 240 Volts AC and a current rating of 2 Amps on a inductive load, and the other with a range of 0 to 28 Volts DC, with a current rating of 2 Amps on a resistive load.

The operating voltage for the Eaton-Cutler Hammer 92-01810-02 PanelMate 92** operator interface is multi-range because the interface can work at both 120 Volts AC and 240 Volts AC. Its current rating is 0.5 Amps and its power rating is 35 Watts. In addition to the power source connections that are fixed terminals, there are 4 connection sockets, and 3 of them are marked as “Switch”, “Fault relay”, “Audio” sockets while the other one is for control wiring connections. All of these connection sockets, the 2 serial ports, the power switch, and the power connections are located at the right side of the unit. The sturdy metal case of the 92-01810-02 operator interface panel and its protected front side offer an IP 20 level of protection due to the interface's open-type construction.