92-01820-01

The Eaton Cutler-Hammer 92-01820-01 PanelMate 92** operator interface is a low-cost interface control solution and it comes with the ability to adapt to many different application scenarios. Controlling actuators and monitoring the status of different variables from a single Eaton Cutler-Hammer 92-01820-01 PanelMate 92** operator interface makes applications easier, and some of these applications include motion control system and flow control system applications. The programming of the user’s control algorithm is done through a proprietary software environment that can be accessed by using any Windows PC. Once the graphics interface and all its functions have been customized by the users, they can be downloaded to the Eaton Cutler-Hammer 92-01820-01 PanelMate 92** operator interface via a serial transfer cable that is sold separately.

The Eaton Cutler-Hammer 92-01820-01 PanelMate 92** operator interface uses a 24 Volts DC power source and it has a detachable plastic connector that receives the power source wires in screw terminals labeled as the positive (+), negative (-) and ground (GND) terminals. This power source can deliver a maximum and minimum of 15% voltage over or under the 24 Volts DC nominal voltage rating. It comes from the factory with a CPU that features a 16-bit microprocessor running at a speed of 16 MHz. Two serial ports supporting the RS-232 and RS-484 transmission protocols are located at the back of the Eaton Cutler-Hammer 92-01820-01 PanelMate 92** operator interface to allow for data interchange with industrial networks by using the aforementioned serial protocols and the user’s PC (for upgrading firmware and downloading user interfaces). Given the open style of construction employed on this PanelMate HMI, the manufacturer recommends placing the unit inside an enclosure with temperature and humidity control systems that can guarantee the free circulation of cool air through the unit’s ventilation system.