92-01865-00

The Eaton Cutler-Hammer 92-01865-00 Panelmate 92** control panel needs to be tested before it is installed in an industrial enclosure and used. When the video system in the control panel produces an alarm tone during the test, that means that the panel has experienced a failure or a fatal error. If the panel generates a 100-Hertz tone within a duration of 250 milliseconds, this indicates the 92-01865-00 Panelmate 92** control panel has passed the test. However, if an 800-Hertz tone is generated within a duration of 500 milliseconds, this indicates that the Panelmate unit has failed the test. In both tests, there is a pause of 3 seconds after every tone sequence. The tests are conducted to check the status of the real-time clock battery, the real-time clock (timing), Serial Port 1, Serial Port 2, DRAM, frame buffer SRAM, character cell SRAM, and the watchdog timer.

When ordering the PLC cables for the Eaton Cutler-Hammer 92-01865-00 Panelmate 92** unit, use these catalog numbers: TI32 for the PLC direct and TI 405 Series cable (RS232C) and TI34 for the PLC Direct and TI 435 Series cable (RS422). The 92-01865-00 control panel conforms to several international standards and approvals. These include the Electrical Fast Transient rating as per the EN61000-4-4/1995 standards, the Electrostatic Discharge Immunity rating as per the EN61000-4-2/1995 standards, the Radiated Emission rating as per the CISPR22- Class A standards, and Radiated Immunity rating as per the EN61000-4-3/1995 standards. It also has agency certifications such as the CE (Low Voltage Directive), UL 508, cUL, and CSA (C22.2 No. 14) certifications. The Panelmate 92** control panel has a transportation and storage temperature range of -4 to +140 degrees Fahrenheit and an operating temperature range of 32 to 122 degrees Fahrenheit. It uses a natural air cooling method and it has a tolerable relative humidity range of 20 to 90%.