92-01941-01

The Eaton Cutler-Hammer 92-01941-01 PanelMate 92** operator interface has both a touchpanel and a touchscreen that is made of acrylic for operator input. The interface is a DC-powered system with a 24 Volts DC of power Voltage, 23 Watts of power consumption, and 1.1 Amps of electric current. The PanelMate 92** operator interface has a fault relay current of 2 Amps at 240 Volts AC and a current of 2 Amps at 28 Volts DC. It has an optional audio feedback kit with an external 8 Ohms rated speaker. The unit has a security keyswitch for external password and security applications. The 92-01941-01 PanelMate 92** operator interface port that is known as Serial Port 1 can be used for PLC and host communications, connection to a printer, or connection to a computer for either downloading or uploading data. Serial Port 2 on the interface can be used for PLC and host communications or for connection to a printer.

When the Eaton Cutler-Hammer 92-01941-01 operator interface is powered up, it will show a listing of its internal diagnostics checks. After the completion of the diagnostic tests, the panel will go to the Offline Mode menu with the following selections: the Execute Diagnostics, the Serial Transfer Mode, the Network transfer Mode, System Configuration Information, the Run Mode, and the Calibrate Touchscreen option. The Execute Diagnostics option allows the users to carry out tests such as the display test, the system status, the date and time setting, the tone, relay and battery test, and the touchscreen test. It has a temperature rating with a T4A code and a temperature marking of 120 degrees Celsius. The operating temperature range for the 92-01941-01 PanelMate 92** operator interface is 0 to 40 degrees Celsius.