92-01941-02

The Eaton Cutler-Hammer 92-01941-02 PanelMate 92** operator interface has a Human-Machine Interface (HMI) monitor with a responsive touchscreen made of acrylic for operator input. The unit is available in a 7.7-inch colo dual-scan display with a complete VGA resolution of 640 by 480 and a 256-color palette on color display versions. It can be panel mounted in a 4-inch-deep industrial enclosure. The 92-01941-02 PanelMate 92** interface requires 24 Volts DC input power, 23 Watts of rated power consumption, and an electric current rating of 1.1 Amps. It has a fault relay current rating of 2 Amps at 240 Volts AC and a rating of 2 Amps at 28 Volts DC. The 92-01941-02 PanelMate 92** interface is appropriate for non-hazardous locations with Class I, Division 2, and Groups A, B, C, and D ratings.

The Eaton Cutler-Hammer 92-01941-02 PanelMate 92** operator interface has a peak inrush current rating of 5 Amps. The serial port has a selectable communication rate between 110 and 38,400 baud. The serial ports 1 and 2 have a configuration with DB9S connections that are selectable for the RS-485-2, RS-422, or RS-232 signal levels. When appropriately installed, the unit has an environmental protection rating of Type 12, Type 4X, or Type 4. The temperature for operating is 0 to 40 degrees Celsius while the non-operating temperature range is -20 to 60 degrees Celsius. It has a vibration rating of 1 G at a frequency between 10 to 500 Hertz and a shock rating of 30 G when operating and when not operating. The PanelMate 92** interface has a pollution degree of 1 for environments with non-conductive or dry pollutants only. It has an approximate weight of 4 pounds.