92-01942-01

The Eaton Cutler-Hammer 92-01942-01 PanelMate 92** operator interface is designed for panel mounting in a 4-inch-deep industrial enclosure. If properly mounted, the PanelMate 92** interface conforms to the Type 12, 4X, or 4 installation ratings. Correct installation and enclosure sizing are vital to enable trouble-free operation and to ensure that the unit has a long life. It is recommendable to mount the PanelMate 92** interface in a vertical position. If it is installed in an angled or flat position, this will severely shorten the lifespan of the PanelMate 92** interface. The 92-01942-01 PanelMate 92** interface is a DC powered unit with an input power of 24 Volts DC (-15% to +20%). It has a power consumption rating of 27 Watts when a high-speed interface has been installed and 23 Watts when a high-speed interface has not been installed. The unit's electric current rating is 1.3 Amps with the installation of a high-speed interface and it is 1.1 Amps without a high-speed interface.

The Eaton Cutler-Hammer 92-01942-01 PanelMate 92** operator interface supports Serial Port 1 and 2 configuration with a DB9S connection that is selectable for the RS-485-2, RS-422, or the RS-232 signal levels. The serial ports have a selectable communication rate between 110 to 34,800 baud. This interface device is a human-machine interface monitor that is panel-mounted with a responsive touchscreen for the operator input. The 92-01942-01 PanelMate 92** operator interface has operating and non-operating temperature ranges of 0 to 50 degrees Celsius and -20 to 60 degrees Celsius, respectively. It has a vibration response of 1 G at a frequency ranging from 10 to 500 Hertz and shock resistance of 30 G for both operating and non-operating conditions.