92-01943-02

The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** interface is designed to operate with a power voltage rating of 24 Volts DC. The unit has a power consumption rating of 23 Watts without a high-speed interface and it is 27 Watts with a high-speed interface installed in the system. It also has an electric current of 1.1 Amps without a high-speed interface and it is 1.3 Amps with a high-speed interface attached. It has a peak inrush current rating up to 5 Amps and optically isolated ports that can withstand power voltages not exceeding 1500 Volts. The unit has agency certifications such as CE, UL, CSA, cUL and CSA/ UL Class I Div 2, Groups A, B, C, and D certifications. The 92-01943-02 PanelMate 92** interface has an 8.4-inch color TFT flatpanel display with a complete VGA resolution and 256 colors or shades in the graphics.

The Eaton Cutler-Hammer 92-01943-02 PanelMate 92** operator interface is designed for use in Type 12, Type 4X, or Type 4 installations if  it is properly mounted in an industrial enclosure. It has 2 RS-422/RS-232 serial ports for printing messages and alarms or communication. For future upgrades, the unit has non-volatile flash memory. The 92-01943-02 PanelMate 92** interface has serial port configuration with DB9S connections for RS-422, RS-232, or RS-485-2 signal levels and a serial port rate between 110 and 38,400 baud. It has a pollution rating of Pollution Degree 1, which is rated for exposure to non-conductive or dry pollutants. It has an operating and non-operating shock of 30 G. It has a maximum vibration rating of 1 G at 10 to 500 Hertz when operating and not operating.