7585T-8 | Eaton Cutler-Hammer Panelmate Panelmate ePro

7585T-8

Rated 4.5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

7585T-8

Description: The 7585T-8 terminal is a PanelMate ePro HMI manufactured by Eaton Cutler-Hammer. The 7585T-8 terminal features an 8.4-inch display.
Available Now
Request a quote for 7585T-8

Description:

The 7585T-8 terminal is a PanelMate ePro HMI manufactured by Eaton Cutler-Hammer. The 7585T-8 terminal features an 8.4-inch display.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 7585T-8.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 16 reviews

    Technical Specifications for 7585T-8

BrandEaton Cutler-Hammer
SeriesPanelmate ePro
Part Number7585T-8
Amperage Rating 1.6 Amps
voltage 24 Volts DC
Wattage 34 Watts
Communication EtherNet
Display Type LED
InputTouchscreen
Display Size8.4 inches
BrandEaton Cutler-Hammer
SeriesPanelmate ePro
Part Number7585T-8
Amperage Rating 1.6 Amps
voltage 24 Volts DC
Wattage 34 Watts
Communication EtherNet
Display Type LED
InputTouchscreen
Display Size8.4 inches
s

About 7585T-8

The 7585T-8 terminal is an Eaton Cutler-Hammer human-machine interface. It comes with an 8.4-inch display size and with a color TFT display. The component features a single OPC driver while the data entry device is a touchscreen. The human-machine interface supports the CompactFlash slot and this slot is usually located on the side of the unit. If users are installing the CompactFlash memory card, they must ensure that the guides are lined up appropriately while the lip on the memory card is oriented towards the back of the unit. The 7585T-8 terminal comes with PCMIA slots located on the side of the unit and it supports up to 2 Type II cards, or a single Type III card. If the users are installing the PCMIA card into the 7585T-8 terminal, they must ensure that the guides are properly lined up similarly to the guides on the CompactFlash card. Do not hot-swap the PCMCIA card without verifying that the card is hot-swappable first.



 



The Eaton 7585T-8 terminal comes with a sturdy build for ensuring that the component has the ability to withstand severe industrial environmental conditions. This means that it is suitable for use in various industrial settings where there are extreme conditions. The users should ensure that this terminal adheres to all the local codes and electrical standards and regulations. When installing the 7585T-8 terminal, ensure the use of an isolated power supply. Note that the AC to DC power supplies are isolated while the DC to DC power supplies are non-isolated. In addition, make use of single-point grounding and install the power supply solely for the PanelMate ePro human-machine interface. For communication, the 7585T-8 terminal supports an EtherNet connection while using the static IP addressing.



Repair Services for 7585T-8

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 7585T-8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 7585T-8

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 7585T-8

Resolutions For 7585T-8

About

Technical Specifications for 7585T-8

BrandEaton Cutler-Hammer
SeriesPanelmate ePro
Part Number7585T-8
Amperage Rating 1.6 Amps
voltage 24 Volts DC
Wattage 34 Watts
Communication EtherNet
Display Type LED
InputTouchscreen
Display Size8.4 inches
BrandEaton Cutler-Hammer
SeriesPanelmate ePro
Part Number7585T-8
Amperage Rating 1.6 Amps
voltage 24 Volts DC
Wattage 34 Watts
Communication EtherNet
Display Type LED
InputTouchscreen
Display Size8.4 inches

About 7585T-8

The 7585T-8 terminal is an Eaton Cutler-Hammer human-machine interface. It comes with an 8.4-inch display size and with a color TFT display. The component features a single OPC driver while the data entry device is a touchscreen. The human-machine interface supports the CompactFlash slot and this slot is usually located on the side of the unit. If users are installing the CompactFlash memory card, they must ensure that the guides are lined up appropriately while the lip on the memory card is oriented towards the back of the unit. The 7585T-8 terminal comes with PCMIA slots located on the side of the unit and it supports up to 2 Type II cards, or a single Type III card. If the users are installing the PCMIA card into the 7585T-8 terminal, they must ensure that the guides are properly lined up similarly to the guides on the CompactFlash card. Do not hot-swap the PCMCIA card without verifying that the card is hot-swappable first.



 



The Eaton 7585T-8 terminal comes with a sturdy build for ensuring that the component has the ability to withstand severe industrial environmental conditions. This means that it is suitable for use in various industrial settings where there are extreme conditions. The users should ensure that this terminal adheres to all the local codes and electrical standards and regulations. When installing the 7585T-8 terminal, ensure the use of an isolated power supply. Note that the AC to DC power supplies are isolated while the DC to DC power supplies are non-isolated. In addition, make use of single-point grounding and install the power supply solely for the PanelMate ePro human-machine interface. For communication, the 7585T-8 terminal supports an EtherNet connection while using the static IP addressing.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 7585T-8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 7585T-8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF